ATTINY44A-CCUR
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Contact Plating | Copper, Silver, Tin |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 15-UFBGA |
| Number of Pins | 15 |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tape & Reel (TR) |
| Published | 1997 |
| Series | AVR® ATtiny |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 15 |
| Terminal Finish | Matte Tin (Sn) |
| Additional Feature | ALSO OPERATES 1.8 V MINIMUM SUPPLY AT 4 MHZ |
| Subcategory | Microcontrollers |
| Technology | CMOS |
| Terminal Position | BOTTOM |
| Terminal Form | BALL |
| Peak Reflow Temperature (Cel) | 260 |
| Supply Voltage | 5V |
| Terminal Pitch | 0.65mm |
| Frequency | 20MHz |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Base Part Number | ATTINY44A |
| Qualification Status | Not Qualified |
| Supply Voltage-Max (Vsup) | 5.5V |
| Supply Voltage-Min (Vsup) | 4.5V |
| Interface | SPI |
| Memory Size | 4kB |
| Oscillator Type | Internal |
| Number of I/O | 12 |
| RAM Size | 256 x 8 |
| Voltage - Supply (Vcc/Vdd) | 1.8V~5.5V |
| uPs/uCs/Peripheral ICs Type | MICROCONTROLLER, RISC |
| Core Processor | AVR |
| Peripherals | Brown-out Detect/Reset, POR, PWM, Temp Sensor, WDT |
| Program Memory Type | FLASH |
| Core Size | 8-Bit |
| Program Memory Size | 4KB 2K x 16 |
| Connectivity | USI |
| Supply Current-Max | 7mA |
| Bit Size | 8 |
| Data Converter | A/D 8x10b |
| Watchdog Timer | Yes |
| Has ADC | YES |
| DMA Channels | NO |
| Data Bus Width | 8b |
| PWM Channels | YES |
| DAC Channels | NO |
| Number of Timers/Counters | 2 |
| ROM (words) | 4096 |
| EEPROM Size | 256 x 8 |
| Height Seated (Max) | 0.6mm |
| Length | 3mm |
| RoHS Status | ROHS3 Compliant |
ATTINY44A-CCUR Overview
Due to the benefits of saving space, it is available in the 15-UFBGA package. It is mounted using the way of Surface Mount. A package of Tape & Reel (TR) contains it. A core processor of AVR is present in the device. Work should be done at -40°C~85°C TA. The type of memory in which this program is stored is FLASH. There are 12 I/Os on it. Other components that are comparable to it have the base part number ATTINY44A. At BOTTOM, it has its terminals. 15 terminationals are present. In the AVR? ATtiny series, this electrical component is found. The 5V supply voltage enables high efficiency. UPs/UCS/Peripheral ICs of this gadget are MICROCONTROLLER, RISC in order to monitor their performance. A total of 15 pins are required to construct this device. A method of mounting is used, which is Surface Mount. It is one of the components included in Microcontrollers. A device with a memory size of 4kB can store programs and data. There is a maximum current supply of 7mA. It is highly efficient when it works at a frequency of 20MHz. 2 timer/counters are present. In addition, it is also capable of having the property ALSO OPERATES 1.8 V MINIMUM SUPPLY AT 4 MHZ. Normally, the supply voltage (Vsup) should remain above 4.5V. Internal is the oscillator type it uses.
ATTINY44A-CCUR Features
15-UFBGA package
Mounting type of Surface Mount
Microcontrollers subcategory
ATTINY44A-CCUR Applications
There are a lot of Microchip Technology ATTINY44A-CCUR Microcontroller applications.
- Mice
- Accu-check
- Set-top boxes
- Tape drives
- Electronic jamming systems
- Toys
- Current meter
- Leakage current tester
- Torpedo guidance
- Hearing aids
