ATTINY45V-10PU
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Contact Plating | Tin |
| Mount | Through Hole |
| Mounting Type | Through Hole |
| Package / Case | 8-DIP (0.300, 7.62mm) |
| Number of Pins | 8 |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tube |
| Published | 2011 |
| Series | AVR® ATtiny |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| Termination | Through Hole |
| Subcategory | Microcontrollers |
| Technology | CMOS |
| Terminal Position | DUAL |
| Peak Reflow Temperature (Cel) | NOT APPLICABLE |
| Supply Voltage | 3V |
| Frequency | 10MHz |
| Time@Peak Reflow Temperature-Max (s) | NOT APPLICABLE |
| Base Part Number | ATTINY45 |
| Qualification Status | Not Qualified |
| Supply Voltage-Max (Vsup) | 5.5V |
| Interface | SPI |
| Memory Size | 4kB |
| Oscillator Type | Internal |
| Number of I/O | 6 |
| RAM Size | 256 x 8 |
| Voltage - Supply (Vcc/Vdd) | 1.8V~5.5V |
| uPs/uCs/Peripheral ICs Type | MICROCONTROLLER, RISC |
| Core Processor | AVR |
| Peripherals | Brown-out Detect/Reset, POR, PWM, WDT |
| Program Memory Type | FLASH |
| Core Size | 8-Bit |
| Program Memory Size | 4KB 2K x 16 |
| Connectivity | USI |
| Bit Size | 8 |
| Data Converter | A/D 4x10b |
| Watchdog Timer | Yes |
| Access Time | 10 μs |
| Has ADC | YES |
| DMA Channels | NO |
| Data Bus Width | 8b |
| PWM Channels | YES |
| Number of Timers/Counters | 2 |
| Density | 32 kb |
| EEPROM Size | 256 x 8 |
| Number of Programmable I/O | 6 |
| Number of ADC Channels | 4 |
| Number of I2C Channels | 1 |
| Height | 4.953mm |
| Length | 10.16mm |
| Width | 7.112mm |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
ATTINY45V-10PU Overview
There is a 8-DIP (0.300, 7.62mm) package available to save space. The way of mounting it is Through Hole. There is a Tube package available for it. A AVR core processor powers the device. When working, the temperature should be kept at -40°C~85°C TA. FLASH has been assigned to it as a program memory. 6 I/Os can be found on it. It has a part number of ATTINY45 that can be used to locate similar components. The terminals of this device are set to DUAL. 8 terminationals are present. The AVR? ATtiny series includes this electrical component. Because the supply voltage is 3V, high efficiency can be achieved. In this gadget, MICROCONTROLLER, RISC is the device's uPs/uCs/Peripheral IC. The structure is constructed from 8 pins. During the mounting process, the device is mounted based on the Through Hole method. It belongs to the subcategory Microcontrollers. Data and programs can be stored on the devices with a memory size of 4kB. The system is highly efficient when working at a frequency of 10MHz. A total of 2 timers/counters have been set up. A chip with 6 programmable inputs/outputs is available. There is an oscillator type Internal used in this circuit.
ATTINY45V-10PU Features
8-DIP (0.300, 7.62mm) package
Mounting type of Through Hole
Microcontrollers subcategory
ATTINY45V-10PU Applications
There are a lot of Microchip Technology ATTINY45V-10PU Microcontroller applications.
- Speed meter
- Walkie talkies
- Fabric
- Playstation
- Data acquisition and control
- Robots
- Vacuum cleaners
- 3D printers
- Toasters
- Process control devices
