ATTINY84-20MUR
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Contact Plating | Tin |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 20-WFQFN Exposed Pad |
| Number of Pins | 20 |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tape & Reel (TR) |
| Published | 1997 |
| Series | AVR® ATtiny |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 20 |
| Subcategory | Microcontrollers |
| Technology | CMOS |
| Terminal Position | QUAD |
| Terminal Form | NO LEAD |
| Peak Reflow Temperature (Cel) | 260 |
| Supply Voltage | 5V |
| Terminal Pitch | 0.5mm |
| Frequency | 20MHz |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Base Part Number | ATTINY84 |
| Qualification Status | Not Qualified |
| Supply Voltage-Max (Vsup) | 5.5V |
| Power Supplies | 3/5V |
| Supply Voltage-Min (Vsup) | 4.5V |
| Interface | SPI |
| Memory Size | 896B |
| Oscillator Type | Internal |
| Number of I/O | 12 |
| RAM Size | 512 x 8 |
| Memory Type | FLASH, OTP |
| Voltage - Supply (Vcc/Vdd) | 2.7V~5.5V |
| uPs/uCs/Peripheral ICs Type | MICROCONTROLLER, RISC |
| Core Processor | AVR |
| Peripherals | Brown-out Detect/Reset, POR, PWM, Temp Sensor, WDT |
| Program Memory Type | FLASH |
| Core Size | 8-Bit |
| Program Memory Size | 8KB 4K x 16 |
| Connectivity | USI |
| Supply Current-Max | 9mA |
| Bit Size | 8 |
| Data Converter | A/D 8x10b |
| Watchdog Timer | Yes |
| Has ADC | YES |
| DMA Channels | NO |
| Data Bus Width | 8b |
| PWM Channels | YES |
| DAC Channels | NO |
| Number of Timers/Counters | 2 |
| EEPROM Size | 512 x 8 |
| Height Seated (Max) | 0.8mm |
| Length | 4mm |
| RoHS Status | ROHS3 Compliant |
ATTINY84-20MUR Overview
For the purpose of saving space, it is available in the 20-WFQFN Exposed Pad package. The way of Surface Mount is used to mount it. A package of Tape & Reel (TR) contains it. It is equipped with a AVR core processor. During work, the temperature should remain at -40°C~85°C TA. FLASH is its program memory type. 12 I/Os can be found on it. It has a part number of ATTINY84 that can be used to locate similar components. A QUAD position is assigned to its terminals. A 20 termination is contained within it. The AVR? ATtiny series includes this electrical component. Because the supply voltage is 5V, high efficiency can be achieved. Storage of data is performed using memory type FLASH, OTP. uPs/uCs/Peripheral IC for this gadget is MICROCONTROLLER, RISC. 20 pins are used to construct it. Mounting is performed in accordance with Surface Mount. The component is included in Microcontrollers. In order to store data and programs, the devices have a memory size of 896B. The maximum supply current is 9mA. A 3/5V source of power is being used to run it. Using a frequency of 20MHz, it is very efficient. There are currently 2 timers/counters set up on the system. In order to maintain normal operation, the supply voltage (Vsup) should be maintained above 4.5V. Internal is the oscillator type it uses.
ATTINY84-20MUR Features
20-WFQFN Exposed Pad package
Mounting type of Surface Mount
Microcontrollers subcategory
ATTINY84-20MUR Applications
There are a lot of Microchip Technology ATTINY84-20MUR Microcontroller applications.
- DVD\DV\MP3 players
- Computed Tomography (CT scan)
- Walkie talkies
- Petrochemical
- DCS control intelligent sensor
- Information appliances (networking of household appliances)
- Heater/Fan
- Fax machines
- Smoke alarms
- Robots
