ATTINY841-MUR
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Contact Plating | Tin |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 20-WFQFN Exposed Pad |
| Weight | 123.008581mg |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tape & Reel (TR) |
| Published | 1997 |
| Series | AVR® ATtiny |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 20 |
| Subcategory | Microcontrollers |
| Technology | CMOS |
| Terminal Position | QUAD |
| Terminal Form | NO LEAD |
| Supply Voltage | 3.3V |
| Terminal Pitch | 0.5mm |
| Frequency | 16MHz |
| Base Part Number | ATTINY841 |
| JESD-30 Code | S-XQCC-N20 |
| Qualification Status | Not Qualified |
| Supply Voltage-Max (Vsup) | 5.5V |
| Power Supplies | 1.8/5V |
| Supply Voltage-Min (Vsup) | 1.7V |
| Interface | I2C, SPI, UART, USART |
| Memory Size | 8kB |
| Oscillator Type | Internal |
| Number of I/O | 12 |
| RAM Size | 512 x 8 |
| Voltage - Supply (Vcc/Vdd) | 1.7V~5.5V |
| uPs/uCs/Peripheral ICs Type | MICROCONTROLLER, RISC |
| Core Processor | AVR |
| Peripherals | PWM |
| Program Memory Type | FLASH |
| Core Size | 8-Bit |
| Program Memory Size | 8KB 8K x 8 |
| Connectivity | I2C, SPI, UART/USART |
| Supply Current-Max | 6mA |
| Bit Size | 8 |
| Data Converter | A/D 12x10b |
| Watchdog Timer | Yes |
| Has ADC | YES |
| DMA Channels | NO |
| Data Bus Width | 8b |
| PWM Channels | YES |
| DAC Channels | NO |
| Number of Timers/Counters | 3 |
| ROM (words) | 4096 |
| EEPROM Size | 512 x 8 |
| Height Seated (Max) | 0.8mm |
| Length | 4mm |
| RoHS Status | ROHS3 Compliant |
ATTINY841-MUR Overview
There is a 20-WFQFN Exposed Pad package available to save space. A Surface Mount mounting method is used. Tape & Reel (TR) is the package that contains it. A AVR core processor powers the device. Work should be done at -40°C~85°C TA. The type of memory in which this program is stored is FLASH. 12 I/Os can be found on it. A component with the same part number as ATTINY841 can be compared to other similar components. The terminals of this device are set to QUAD. This circuit consists of 20 terminationals. The electrical component is part of the series AVR? ATtiny. The supply voltage of 3.3V allows for high efficiency. The gadget has MICROCONTROLLER, RISC as its uPs/uCs/peripheral IC. The mounting of this device is carried out following the method of Surface Mount. In the subcategory of Microcontrollers, this component is included. Data and programs may be stored on the devices which have a memory size of 8kB. Supply current is maximum at 6mA. Power is provided by a source of 1.8/5V. It is highly efficient when it works at a frequency of 16MHz. A total of 3 timers/counters have been set up. In order to maintain normal operation, Vsup must be above 1.7V. An oscillator of type Internal is used.
ATTINY841-MUR Features
20-WFQFN Exposed Pad package
Mounting type of Surface Mount
Microcontrollers subcategory
ATTINY841-MUR Applications
There are a lot of Microchip Technology ATTINY841-MUR Microcontroller applications.
- Computer/laptop
- DDC control
- Tape drives
- Nintendo
- Kindle
- Automatic control
- DVD\DV\MP3 players
- Multi-meter
- Plant factories (special plant factories, soilless cultivation technology, smart seed engineering)
- Volt meter
