ATUC128D3-A2UT
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Contact Plating | Tin |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 64-LQFP |
| Number of Pins | 64 |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tray |
| Published | 2011 |
| Series | AVR®32 UC3 D |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 64 |
| Additional Feature | ALSO REQUIRES 3.3V I/O SUPPLY |
| Subcategory | Microcontrollers |
| Technology | CMOS |
| Terminal Position | QUAD |
| Terminal Form | GULL WING |
| Supply Voltage | 1.8V |
| Terminal Pitch | 0.5mm |
| Frequency | 48MHz |
| Base Part Number | ATUC128D |
| Qualification Status | Not Qualified |
| Operating Supply Voltage | 1.8V |
| Supply Voltage-Max (Vsup) | 1.95V |
| Power Supplies | 1.83.3V |
| Interface | I2C, SPI, UART, USART, USB |
| Memory Size | 128kB |
| Oscillator Type | Internal |
| Number of I/O | 51 |
| RAM Size | 16K x 8 |
| Voltage - Supply (Vcc/Vdd) | 1.65V~3.6V |
| uPs/uCs/Peripheral ICs Type | MICROCONTROLLER, RISC |
| Core Processor | AVR |
| Peripherals | Brown-out Detect/Reset, DMA, I2S, POR, PWM, WDT |
| Program Memory Type | FLASH |
| Core Size | 32-Bit |
| Program Memory Size | 128KB 128K x 8 |
| Connectivity | I2C, SPI, UART/USART, USB |
| Bit Size | 32 |
| Data Converter | A/D 8x10b |
| Watchdog Timer | Yes |
| Has ADC | YES |
| DMA Channels | YES |
| Data Bus Width | 32b |
| PWM Channels | YES |
| DAC Channels | NO |
| Number of Timers/Counters | 4 |
| ROM (words) | 131072 |
| Height Seated (Max) | 1.2mm |
| Length | 10mm |
| RoHS Status | ROHS3 Compliant |
ATUC128D3-A2UT Overview
Due to the benefits of saving space, it is available in the 64-LQFP package. In this case, it is mounted using the method of Surface Mount. You can find it in the package of Tray. AVR core processor is present on the device. When working, the temperature should be kept at -40°C~85°C TA. Memory type FLASH is used for program memory. 51 I/Os can be found on it. In order to find similar components, it has a base part number of ATUC128D. QUAD is the location of its terminals. Currently, it consists of 64 terminationals. Part of the AVR?32 UC3 D series, this electrical component is used in a variety of applications. The 1.8V supply voltage enables high efficiency. uPs/uCs/Peripheral IC for this gadget is MICROCONTROLLER, RISC. A total of 64 pins are required to construct this device. It is mounted based on the method of Surface Mount. It belongs to the subcategory Microcontrollers. Memory size for the devices is 128kB, which can be used to store programs and data. There is a source of power of 1.83.3V that powers this device. It performs extremely well at a frequency of 48MHz. While deploying 1.8V, designers will be able to fully take advantage of its adaptability. It appears that there are 4 timers/counters in use. Moreover, it possesses the property of ALSO REQUIRES 3.3V I/O SUPPLY. Using an oscillator type of Internal, it works.
ATUC128D3-A2UT Features
64-LQFP package
Mounting type of Surface Mount
Microcontrollers subcategory
ATUC128D3-A2UT Applications
There are a lot of Microchip Technology ATUC128D3-A2UT Microcontroller applications.
- Computer/laptop
- Plant factories (special plant factories, soilless cultivation technology, smart seed engineering)
- Electromechanical control
- Answering machines
- Smart highways (navigation, traffic control, information monitoring and car service)
- Accu-check
- Guidance-GPS
- Mice
- Fax machines
- Leakage current tester
