ATUC128D4-Z1UT
| Parameters | |
|---|---|
| Number of Timers/Counters | 4 |
| Number of PWM Channels | 7 |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Factory Lead Time | 1 Week |
| Contact Plating | Tin |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 48-VFQFN Exposed Pad |
| Number of Pins | 48 |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tray |
| Published | 2011 |
| Series | AVR®32 UC3 D |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 48 |
| Additional Feature | ALSO REQUIRES 3.3V I/O SUPPLY |
| Subcategory | Microcontrollers |
| Technology | CMOS |
| Terminal Position | QUAD |
| Terminal Form | NO LEAD |
| Supply Voltage | 1.8V |
| Terminal Pitch | 0.5mm |
| Frequency | 48MHz |
| Base Part Number | ATUC128D |
| Qualification Status | Not Qualified |
| Operating Supply Voltage | 1.8V |
| Supply Voltage-Max (Vsup) | 1.95V |
| Power Supplies | 1.83.3V |
| Interface | I2C, SPI, UART, USART, USB |
| Memory Size | 128kB |
| Oscillator Type | Internal |
| Number of I/O | 35 |
| RAM Size | 16K x 8 |
| Voltage - Supply (Vcc/Vdd) | 1.65V~3.6V |
| uPs/uCs/Peripheral ICs Type | MICROCONTROLLER, RISC |
| Core Processor | AVR |
| Peripherals | Brown-out Detect/Reset, DMA, I2S, POR, PWM, WDT |
| Program Memory Type | FLASH |
| Core Size | 32-Bit |
| Program Memory Size | 128KB 128K x 8 |
| Connectivity | I2C, SPI, UART/USART, USB |
| Bit Size | 32 |
| Data Converter | A/D 6x10b |
| Has ADC | YES |
| DMA Channels | YES |
| Data Bus Width | 32b |
| DAC Channels | NO |
ATUC128D4-Z1UT Overview
For the purpose of saving space, it is available in the 48-VFQFN Exposed Pad package. A Surface Mount mounting method is used. It comes in a Tray package. It is equipped with a AVR core processor. Work should be done at -40°C~85°C TA. The type of memory it uses is FLASH. It has a number of 35I/Os. A comparable component can be found by using the base part number ATUC128D. The terminals of this device are located at QUAD. 48 terminationals are present. In the AVR?32 UC3 D series, this electrical component is found. Because the supply voltage is 1.8V, high efficiency can be achieved. uPs/uCs/Peripheral IC for this gadget is MICROCONTROLLER, RISC. For its construction, 48 pins are used. The mounting of this device is carried out following the method of Surface Mount. In the subcategory of Microcontrollers, this component is included. In the device, there is a memory capacity of 128kB which may be used to store programs and data. There is 1.83.3V power source in this device. Using a frequency of 48MHz, it is very efficient. The supply voltage of 1.8V's adaptability can be fully utilised by designers. 4 timer/counters are present. The property of ALSO REQUIRES 3.3V I/O SUPPLY is also possessed by it. Using an oscillator type Internal, it operates.
ATUC128D4-Z1UT Features
48-VFQFN Exposed Pad package
Mounting type of Surface Mount
Microcontrollers subcategory
ATUC128D4-Z1UT Applications
There are a lot of Microchip Technology ATUC128D4-Z1UT Microcontroller applications.
- Fire detection & safety devices
- Fabric
- Microwave ovens
- Smartphones-calling, video calling, texting, email
- DCS control intelligent sensor
- Robots
- Missile control
- 3D printers
- Temperature sensing and controlling devices
- Toasters
