ATUC256L4U-D3HR
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 48-UFLGA Exposed Pad |
| Number of Pins | 48 |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tape & Reel (TR) |
| Published | 2013 |
| Series | AVR®32 UC3 L |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 48 |
| Subcategory | Microcontrollers |
| Technology | CMOS |
| Terminal Position | BOTTOM |
| Terminal Form | BUTT |
| Supply Voltage | 1.8V |
| Terminal Pitch | 0.4mm |
| Frequency | 50MHz |
| Base Part Number | ATUC256L |
| Qualification Status | Not Qualified |
| Operating Supply Voltage | 1.8V |
| Supply Voltage-Max (Vsup) | 1.98V |
| Power Supplies | 1.81.8/3.3V |
| Interface | CAN, I2C, IrDA, LIN, SPI, UART, USART, USB |
| Memory Size | 64kB |
| Oscillator Type | Internal |
| Number of I/O | 36 |
| RAM Size | 32K x 8 |
| Voltage - Supply (Vcc/Vdd) | 1.62V~3.6V |
| uPs/uCs/Peripheral ICs Type | MICROCONTROLLER, RISC |
| Core Processor | AVR |
| Peripherals | Brown-out Detect/Reset, DMA, POR, PWM, WDT |
| Program Memory Type | FLASH |
| Core Size | 32-Bit |
| Program Memory Size | 256KB 256K x 8 |
| Connectivity | I2C, SPI, UART/USART, USB |
| Bit Size | 32 |
| Data Converter | A/D 8x12b |
| Watchdog Timer | Yes |
| Has ADC | YES |
| DMA Channels | YES |
| Data Bus Width | 32b |
| PWM Channels | YES |
| DAC Channels | NO |
| Number of Timers/Counters | 7 |
| Height Seated (Max) | 0.6mm |
| Length | 5.5mm |
| RoHS Status | ROHS3 Compliant |
ATUC256L4U-D3HR Overview
As a result, it is available in the 48-UFLGA Exposed Pad package. A Surface Mount mounting method is used. There is a Tape & Reel (TR) package available for it. The device has a AVR core processor. In order to work effectively, the temperature should be kept at -40°C~85°C TA. The type of memory in which this program is stored is FLASH. 36 I/Os have been provided by the device. A comparable component can be found by using the base part number ATUC256L. This device has terminals at BOTTOM. It has 48 terminationals. Part of the AVR?32 UC3 L series, this electrical component is used in a variety of applications. By using a 1.8V voltage supply, high efficiency is possible. This gadget has MICROCONTROLLER, RISC as its uPs/uCs/Peripheral IC. It is constructed using 48 pins. It is mounted based on the method of Surface Mount. It falls under the category of Microcontrollers. Memory size for the devices is 64kB, which can be used to store programs and data. A 1.81.8/3.3V source is used for powering it. The system is highly efficient when working at a frequency of 50MHz. 1.8V offers full adaptability and voltage supply when it is employed by designers. There are currently 7 timers/counters set up on the system. Internal is the oscillator type it uses.
ATUC256L4U-D3HR Features
48-UFLGA Exposed Pad package
Mounting type of Surface Mount
Microcontrollers subcategory
ATUC256L4U-D3HR Applications
There are a lot of Microchip Technology ATUC256L4U-D3HR Microcontroller applications.
- Smartphones-calling, video calling, texting, email
- Graphic terminals
- Radio
- Current meter
- DVD\DV\MP3 players
- Hard drives
- Safety -airbags, automatic braking system (ABS)
- Toys
- Scanners
- Magnetic resonance imaging (MRI)
