ATUC64L4U-D3HR
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 48-UFLGA Exposed Pad |
| Number of Pins | 48 |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tape & Reel (TR) |
| Published | 2012 |
| Series | AVR®32 UC3 L |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 48 |
| Subcategory | Microcontrollers |
| Technology | CMOS |
| Terminal Position | BOTTOM |
| Terminal Form | BUTT |
| Supply Voltage | 1.8V |
| Terminal Pitch | 0.4mm |
| Frequency | 10MHz |
| Base Part Number | ATUC64L |
| Qualification Status | Not Qualified |
| Operating Supply Voltage | 1.8V |
| Supply Voltage-Max (Vsup) | 1.98V |
| Power Supplies | 1.81.8/3.3V |
| Interface | I2C, SPI, UART, USART, USB |
| Memory Size | 7kB |
| Oscillator Type | Internal |
| Number of I/O | 36 |
| Speed | 50 MHz |
| RAM Size | 16K x 8 |
| Memory Type | FLASH, OTP |
| Voltage - Supply (Vcc/Vdd) | 1.62V~3.6V |
| uPs/uCs/Peripheral ICs Type | MICROCONTROLLER, RISC |
| Core Processor | AVR |
| Peripherals | Brown-out Detect/Reset, DMA, POR, PWM, WDT |
| Program Memory Type | FLASH |
| Core Size | 32-Bit |
| Program Memory Size | 64KB 64K x 8 |
| Connectivity | I2C, SPI, UART/USART, USB |
| Bit Size | 32 |
| Data Converter | A/D 8x12b |
| Watchdog Timer | Yes |
| Has ADC | YES |
| DMA Channels | YES |
| Data Bus Width | 32b |
| PWM Channels | YES |
| DAC Channels | NO |
| Number of Timers/Counters | 7 |
| ROM (words) | 16384 |
| Height Seated (Max) | 0.6mm |
| Length | 5.5mm |
| RoHS Status | ROHS3 Compliant |
ATUC64L4U-D3HR Overview
For the purpose of saving space, it is available in the 48-UFLGA Exposed Pad package. Using Surface Mount, it is mounted. Tape & Reel (TR) is the package that contains it. The device has a AVR core processor. During work, the temperature should remain at -40°C~85°C TA. It has a type of program memory of FLASH. It has a number of 36I/Os. In order to find similar components, it has a base part number of ATUC64L. The terminals of this device are located at BOTTOM. It has 48 terminationals. An electrical component such as this is included in the series AVR?32 UC3 L. As a result of the 1.8V supply voltage, high efficiency is possible. The type of memory used for data storage is FLASH, OTP. The gadget has MICROCONTROLLER, RISC as its uPs/uCs/peripheral IC. 48 pins are used to construct it. The mounting of this device is carried out following the method of Surface Mount. Microcontrollers contains this component. A device with a memory size of 7kB can store programs and data. Power is provided by a source of 1.81.8/3.3V. It performs extremely well at a frequency of 10MHz. A designer is able to make full use of the adaptability and supply voltage of 1.8V by using it. There are currently 7 timers/counters set up on the system. There is an oscillator type Internal used in this circuit.
ATUC64L4U-D3HR Features
48-UFLGA Exposed Pad package
Mounting type of Surface Mount
Microcontrollers subcategory
ATUC64L4U-D3HR Applications
There are a lot of Microchip Technology ATUC64L4U-D3HR Microcontroller applications.
- Current meter
- Glucose monitoring systems (for Type 1 Diabetes)
- DCS control intelligent sensor
- Pacemakers (used to control abnormal heart rhythm)
- Medical instruments chromatographs
- Industrial instrumentation devices
- Removable disks
- Fabric
- Heart rate monitors
- Automatic control
