ATV2500B-12JC
| Parameters | |
|---|---|
| Max Supply Voltage | 5.25V |
| Min Supply Voltage | 4.75V |
| Number of I/O | 24 |
| Memory Type | EPROM |
| Propagation Delay | 12 ns |
| Turn On Delay Time | 12 ns |
| Frequency (Max) | 90MHz |
| Programmable Logic Type | OT PLD |
| Number of Gates | 2500 |
| Speed Grade | 12 |
| Output Function | MACROCELL |
| Number of Macro Cells | 24 |
| JTAG BST | NO |
| Number of Dedicated Inputs | 13 |
| In-System Programmable | NO |
| Height Seated (Max) | 4.57mm |
| Length | 16.5862mm |
| Width | 16.5862mm |
| Radiation Hardening | No |
| RoHS Status | RoHS Compliant |
| Lead Free | Contains Lead |
| Mount | Surface Mount |
| Package / Case | J |
| Number of Pins | 44 |
| JESD-609 Code | e0 |
| Pbfree Code | no |
| Moisture Sensitivity Level (MSL) | 2 |
| Number of Terminations | 44 |
| ECCN Code | EAR99 |
| Terminal Finish | Tin/Lead (Sn/Pb) |
| Max Operating Temperature | 70°C |
| Min Operating Temperature | 0°C |
| HTS Code | 8542.31.00.01 |
| Subcategory | Programmable Logic Devices |
| Technology | CMOS |
| Terminal Position | QUAD |
| Peak Reflow Temperature (Cel) | 225 |
| Supply Voltage | 5V |
| Terminal Pitch | 1.27mm |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Pin Count | 44 |
| Operating Supply Voltage | 5V |
| Power Supplies | 5V |
| Temperature Grade | COMMERCIAL |
ATV2500B-12JC Overview
In the mobile phone network, there are 24macro cells, which are cells with high-power antennas and towers.In the Jpackage, you will find it.The device is programmed with 24 I/Os.The device is programmed with 44 terminations.This electrical part has a terminal position of QUADand is connected to the ground.Power is provided by a supply voltage of 5V volts.It is a part of the family [0].The chip is programmed with 44 pins.In digital circuits, there are 2500gates, which act as a basic building block.A high level of efficiency can be achieved by maintaining the supply voltage at [0].In general, it is recommended to store data in [0].The electronic component is mounted by Surface Mount.The device has a pinout of [0].A maximum supply voltage of 5.25Vis used in its operation.The minimal supply voltage is 4.75V.It runs on 5Vvolts of power.Ideally, the operating temperature should be greater than 0°C.It is recommended to keep the operating temperature below 70°C.To detect the status of input signals, there are 13dedicated inputs.The maximal frequency should be lower than 90MHz.In programmable logic, a type of logic can be categorized as OT PLD.
ATV2500B-12JC Features
J package
24 I/Os
44 pin count
44 pins
5V power supplies
ATV2500B-12JC Applications
There are a lot of Atmel (Microchip Technology) ATV2500B-12JC CPLDs applications.
- I2C BUS INTERFACE
- USB Bus
- Address decoding
- Random logic replacement
- Interface bridging
- Custom state machines
- Custom shift registers
- Digital systems
- Battery operated portable devices
- Complex programmable logic devices
