Parameters |
Mount |
Through Hole |
Package / Case |
DIP |
Number of Pins |
44 |
JESD-609 Code |
e0 |
Moisture Sensitivity Level (MSL) |
2 |
Number of Terminations |
44 |
Terminal Finish |
Tin/Lead (Sn/Pb) |
Max Operating Temperature |
70°C |
Min Operating Temperature |
0°C |
HTS Code |
8542.39.00.01 |
Subcategory |
Programmable Logic Devices |
Technology |
CMOS |
Terminal Position |
QUAD |
Terminal Form |
J BEND |
Peak Reflow Temperature (Cel) |
225 |
Supply Voltage |
5V |
Terminal Pitch |
1.27mm |
Time@Peak Reflow Temperature-Max (s) |
30 |
Pin Count |
44 |
Qualification Status |
Not Qualified |
Supply Voltage-Max (Vsup) |
5.5V |
Power Supplies |
5V |
Temperature Grade |
INDUSTRIAL |
Supply Voltage-Min (Vsup) |
4.5V |
Number of I/O |
24 |
Clock Frequency |
52MHz |
Propagation Delay |
15 ns |
Programmable Logic Type |
UV PLD |
Number of Gates |
2500 |
Output Function |
MACROCELL |
Number of Macro Cells |
24 |
JTAG BST |
NO |
Number of Dedicated Inputs |
13 |
In-System Programmable |
NO |
Height Seated (Max) |
4.57mm |
Length |
16.5862mm |
Width |
16.5862mm |
RoHS Status |
Non-RoHS Compliant |
Lead Free |
Contains Lead |
ATV2500B-15KI Overview
There are 24 macro cells in the network, which are high-power cell sites that provide radio coverage (tower, antenna, or mast) for a mobile phone network.It is part of the DIP package.As a result, it has 24 I/O ports programmed.It is programmed to terminate devices at [0].As the terminal position of this electrical part is [0], it serves as an important access point for passengers or freight.The device is powered by a voltage of 5V volts.There is a part in the family [0].There are 44 pins on the chip.As a building block for digital circuits, there are 2500gates.Through Holeis the mounting point of this electronic part.The pins are [0].This device runs on 5Vvolts of electricity.Vsup reaches 5.5Vas the maximum supply voltage.In order to operate, the temperature should be higher than 0°C.There should be a temperature below 70°Cat the time of operation.The status of input signals is detected by 13dedicated inputs.Voltage supply (Vsup) should be higher than 4.5V.The clock frequency of the device should not exceed 52MHz.A programmable logic type is classified as UV PLD.
ATV2500B-15KI Features
DIP package
24 I/Os
44 pin count
44 pins
5V power supplies
ATV2500B-15KI Applications
There are a lot of Atmel (Microchip Technology) ATV2500B-15KI CPLDs applications.
- Page register
- Voltage level translation
- Software-Driven Hardware Configuration
- Custom shift registers
- SFP, QSFP, QSFP-DD, OSFP, Mini-SAS HD Port Management
- DDC INTERFACE
- Auxiliary Power Supply Isolated and Non-isolated
- Address decoders
- Digital multiplexers
- Software Configuration of Add-In Boards