ATV2500BQ-20PC
| Parameters | |
|---|---|
| Mount | Surface Mount |
| Package / Case | LCC |
| Number of Pins | 40 |
| JESD-609 Code | e0 |
| Number of Terminations | 40 |
| Terminal Finish | Tin/Lead (Sn/Pb) |
| Max Operating Temperature | 85°C |
| Min Operating Temperature | -40°C |
| HTS Code | 8542.39.00.01 |
| Subcategory | Programmable Logic Devices |
| Technology | CMOS |
| Terminal Position | DUAL |
| Terminal Form | THROUGH-HOLE |
| Peak Reflow Temperature (Cel) | NOT SPECIFIED |
| Supply Voltage | 5V |
| Terminal Pitch | 2.54mm |
| Reach Compliance Code | unknown |
| Time@Peak Reflow Temperature-Max (s) | NOT SPECIFIED |
| Pin Count | 40 |
| Qualification Status | Not Qualified |
| Operating Supply Voltage | 5V |
| Power Supplies | 5V |
| Temperature Grade | COMMERCIAL |
| Max Supply Voltage | 5.25V |
| Min Supply Voltage | 4.75V |
| Number of I/O | 24 |
| Memory Type | EPROM |
| Propagation Delay | 20 ns |
| Frequency (Max) | 45MHz |
| Programmable Logic Type | OT PLD |
| Number of Gates | 2500 |
| Output Function | MACROCELL |
| Number of Macro Cells | 24 |
| JTAG BST | NO |
| Number of Dedicated Inputs | 13 |
| In-System Programmable | NO |
| Height Seated (Max) | 5.59mm |
| Length | 52.2mm |
| RoHS Status | RoHS Compliant |
| Lead Free | Contains Lead |
ATV2500BQ-20PC Overview
A mobile phone network consists of 24macro cells, which are radio coverage cells served by a high-power cell site (tower, antenna or mast).LCCis the package in which it resides.There are 24 I/Os on the board.There is a 40terminations set on devices.This electrical part is wired with a terminal position of DUAL.A voltage of 5V is used as the power supply for this device.There is a part in the family [0].In this chip, the 40pins are programmed.The 2500gates serve as building blocks for digital circuits.The supply voltage should be maintained at 5V for high efficiency.It is recommended to store data in [0].A Surface Mountis mounted on this electronic component.This board has 40 pins.A voltage of 5.25V is the maximum supply voltage for this device.It operates with the minimal supply voltage of 4.75V.The system runs on a power supply of 5V watts.It is recommended that the operating temperature exceed -40°C.A temperature below 85°Cshould be used as the operating temperature.Input signals are detected by 13dedicated inputs.The maximum frequency should not exceed 45MHz.A programmable logic type is classified as OT PLD.
ATV2500BQ-20PC Features
LCC package
24 I/Os
40 pin count
40 pins
5V power supplies
ATV2500BQ-20PC Applications
There are a lot of Atmel (Microchip Technology) ATV2500BQ-20PC CPLDs applications.
- Battery operated portable devices
- Reset swapping
- Bootloaders for FPGAs
- Protection relays
- DDC INTERFACE
- Preset swapping
- Wide Vin Industrial low power SMPS
- Portable digital devices
- Random logic replacement
- Parity generators
