banner_page

ATV2500BQ-25DC

5V 2.54mm PMIC 40 Pin 36MHz 5V DIP


  • Manufacturer: Atmel (Microchip Technology)
  • Nocochips NO: 69-ATV2500BQ-25DC
  • Package: DIP
  • Datasheet: -
  • Stock: 599
  • Description: 5V 2.54mm PMIC 40 Pin 36MHz 5V DIP (Kg)

Details

Tags

Parameters
Mount Through Hole
Package / Case DIP
Number of Pins 40
JESD-609 Code e0
Moisture Sensitivity Level (MSL) 1
Number of Terminations 40
Terminal Finish Tin/Lead (Sn/Pb)
Max Operating Temperature 70°C
Min Operating Temperature -40°C
HTS Code 8542.39.00.01
Subcategory Programmable Logic Devices
Technology CMOS
Terminal Position DUAL
Peak Reflow Temperature (Cel) NOT SPECIFIED
Supply Voltage 5V
Terminal Pitch 2.54mm
Reach Compliance Code unknown
Frequency 36MHz
Time@Peak Reflow Temperature-Max (s) NOT SPECIFIED
Pin Count 40
Qualification Status Not Qualified
Operating Supply Voltage 5V
Power Supplies 5V
Temperature Grade COMMERCIAL
Max Supply Voltage 5.25V
Min Supply Voltage 4.75V
Number of I/O 24
Memory Type EPROM
Propagation Delay 25 ns
Frequency (Max) 36MHz
Programmable Logic Type UV PLD
Number of Gates 2500
Output Function MACROCELL
Number of Macro Cells 24
JTAG BST NO
Number of Dedicated Inputs 13
In-System Programmable NO
Height Seated (Max) 5.72mm
Length 52.45mm
RoHS Status RoHS Compliant
Lead Free Contains Lead

ATV2500BQ-25DC Overview


In the mobile phone network, there are 24macro cells, which are cells with high-power antennas and towers.It is embedded in the DIP package.As a result, it has 24 I/O ports programmed.40terminations are programmed into the device.The terminal position of this electrical part is DUAL, which serves as an important access point for passengers or freight.The power source is powered by 5Vvolts.It is a part of family [0].There are 40pins on the chip.In digital circuits, there are 2500gates, which act as a basic building block.In order to achieve high efficiency, the supply voltage should be maintained at [0].Data is stored using [0].Through Holeis used to mount this electronic component.There are 40 pins on the device.A voltage of 5.25V is the maximum supply voltage for this device.With a minimal supply voltage of [0], it operates.A power supply of 5Vis required to operate it.In this case, 36MHzis the frequency that can be achieved.Ideally, the operating temperature should be greater than -40°C.The operating temperature should be lower than 70°C.The status of input signals is detected by 13dedicated inputs.It is recommended that the maximum frequency is less than 0.There is a type of programmable logic called UV PLD.

ATV2500BQ-25DC Features


DIP package
24 I/Os
40 pin count
40 pins
5V power supplies

ATV2500BQ-25DC Applications


There are a lot of Atmel (Microchip Technology) ATV2500BQ-25DC CPLDs applications.

  • ANALOG-TO-DIGITAL CONVERTOR (ADC)
  • Auxiliary Power Supply Isolated and Non-isolated
  • Pattern recognition
  • STANDARD SERIAL INTERFACE UART
  • Timing control
  • DMA control
  • I/O PORTS (MCU MODULE)
  • Digital systems
  • Wide Vin Industrial low power SMPS
  • Cross-Matrix Switch

Write a review

Note: HTML is not translated!
    Bad           Good