Parameters |
Factory Lead Time |
1 Week |
Mounting Type |
Surface Mount |
Package / Case |
28-SMD Module |
Surface Mount |
YES |
Operating Temperature |
-40°C~85°C |
Packaging |
Tape & Reel (TR) |
Series |
SmartConnect |
Part Status |
Active |
Moisture Sensitivity Level (MSL) |
3 (168 Hours) |
Number of Terminations |
28 |
Technology |
CMOS |
Voltage - Supply |
2.7V~3.6V |
Terminal Position |
UNSPECIFIED |
Terminal Form |
NO LEAD |
Supply Voltage |
3.3V |
Terminal Pitch |
1.016mm |
Frequency |
2.4GHz |
JESD-30 Code |
R-XXMA-N28 |
Memory Size |
4MB Flash 128kB RAM |
uPs/uCs/Peripheral ICs Type |
NETWORK CONTROLLER |
Data Rate |
72.2Mbps |
Utilized IC / Part |
ATWINC1500 |
Protocol |
802.11b/g/n |
Power - Output |
19.5dBm |
RF Family/Standard |
WiFi |
Antenna Type |
Integrated, Trace |
Sensitivity |
-98dBm |
Serial Interfaces |
I2C, SPI, UART |
Current - Receiving |
58.5mA |
Current - Transmitting |
244mA |
Modulation |
16-QAM, 64-QAM, BPSK, CCK, DBPSK, DQPSK, OFDM, QPSK |
Firmware Version |
19.5.2 |
Height Seated (Max) |
2.113mm |
Length |
21.72mm |
Width |
14.73mm |
RoHS Status |
ROHS3 Compliant |
ATWINC1500-MR210PB1952-T Overview
The RF Transceiver' mounting method is Surface Mount.As a result of the use of the Tape & Reel (TR) package, the performance of this RF Transceiver module is optimized.A RF Transceiver module consists of 28 terminations.This Transceiver should operate at a temperature of -40°C~85°C when operating.The RF Transceiver Module belongs to the SmartConnect family.The RF Transceiver can supply 2.7V~3.6V voltage.RF Transceiver Modules operate at 2.4GHz Hz.
ATWINC1500-MR210PB1952-T Features
Surface Mount
Tape & Reel (TR) package
28 terminations
2.7V~3.6V volts
ATWINC1500-MR210PB1952-T Applications
There are a lot of Microchip Technology ATWINC1500-MR210PB1952-T RF Transceiver Modules applications.
-
- Medical
- Power management
- Low-power IoT applications
- Transmit
- POS Terminals
- Patient Asset Tracking
- M2M Communication
- Remote Device Management
- Remote Control