ATWINC1500-MR210PB1954
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mounting Type | Surface Mount |
| Package / Case | 28-SMD Module |
| Surface Mount | YES |
| Operating Temperature | -40°C~85°C |
| Series | SmartConnect |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 28 |
| Technology | CMOS |
| Voltage - Supply | 2.7V~3.6V |
| Terminal Position | UNSPECIFIED |
| Terminal Form | NO LEAD |
| Supply Voltage | 3.3V |
| Frequency | 2.4GHz |
| JESD-30 Code | R-XXMA-N28 |
| Memory Size | 4MB Flash 128kB RAM |
| uPs/uCs/Peripheral ICs Type | MICROPROCESSOR CIRCUIT |
| Data Rate | 72.2Mbps |
| Utilized IC / Part | ATWINC1500 |
| Protocol | 802.11b/g/n |
| Power - Output | 18.5dBm |
| RF Family/Standard | WiFi |
| Antenna Type | Integrated, Trace |
| Sensitivity | -95dBm |
| Serial Interfaces | I2C, SPI, UART |
| Current - Receiving | 61mA |
| Current - Transmitting | 265mA |
| Modulation | 16-QAM, 64-QAM, BPSK, CCK, DBPSK, DQPSK, OFDM, QPSK |
| Firmware Version | 19.5.4 |
| Height Seated (Max) | 2.113mm |
| Length | 21.72mm |
| Width | 14.73mm |
| RoHS Status | ROHS3 Compliant |
ATWINC1500-MR210PB1954 Overview
In order to mount the RF Transceiver, Surface Mount is used.Throughout this RF Transceiver module, there are 28 terminations.During Transceiver operation, the operating temperature should remain at -40°C~85°C.This RF Transceiver Module belongs to the SmartConnect family.The RF Transceiver can supply 2.7V~3.6V voltage.RF Transceiver Modules operate at 2.4GHz Hz.
ATWINC1500-MR210PB1954 Features
Surface Mount
28 terminations
2.7V~3.6V volts
ATWINC1500-MR210PB1954 Applications
There are a lot of Microchip Technology ATWINC1500-MR210PB1954 RF Transceiver Modules applications.
- Automotive
- Internet of Things (IoT)
- LED Lighting
- POS Terminals
- Power Amplifier (PA)
- Receive
- Remote Control
- M2M Communication
- Secure Payment
