ATXMEGA128A1-CU
| Parameters | |
|---|---|
| Connectivity | EBI/EMI, I2C, IrDA, SPI, UART/USART |
| Bit Size | 16 |
| Data Converter | A/D 16x12b; D/A 4x12b |
| Watchdog Timer | Yes |
| Has ADC | YES |
| DMA Channels | YES |
| Data Bus Width | 8b |
| PWM Channels | YES |
| DAC Channels | YES |
| Number of Timers/Counters | 8 |
| EEPROM Size | 2K x 8 |
| Height Seated (Max) | 1.2mm |
| Length | 9mm |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
| Factory Lead Time | 1 Week |
| Contact Plating | Copper, Silver, Tin |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 100-TFBGA |
| Number of Pins | 100 |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tray |
| Published | 2009 |
| Series | AVR® XMEGA® A1 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 100 |
| Additional Feature | ALSO OPERATES AT 1.6V MINIMUM SUPPLY AT 12 MHZ |
| Technology | CMOS |
| Terminal Position | BOTTOM |
| Terminal Form | BALL |
| Peak Reflow Temperature (Cel) | NOT SPECIFIED |
| Supply Voltage | 3.3V |
| Frequency | 32MHz |
| Time@Peak Reflow Temperature-Max (s) | NOT SPECIFIED |
| Base Part Number | ATXMEGA128 |
| Qualification Status | Not Qualified |
| Supply Voltage-Max (Vsup) | 3.6V |
| Supply Voltage-Min (Vsup) | 2.7V |
| Interface | EBI/EMI, I2C, IrDA, SPI, UART, USART |
| Memory Size | 128kB |
| Oscillator Type | Internal |
| Number of I/O | 78 |
| RAM Size | 8K x 8 |
| Voltage - Supply (Vcc/Vdd) | 1.6V~3.6V |
| uPs/uCs/Peripheral ICs Type | MICROCONTROLLER, RISC |
| Core Processor | AVR |
| Peripherals | Brown-out Detect/Reset, DMA, POR, PWM, WDT |
| Program Memory Type | FLASH |
| Core Size | 8/16-Bit |
| Program Memory Size | 128KB 64K x 16 |
ATXMEGA128A1-CU Overview
Due to the benefits of saving space, it is available in the 100-TFBGA package. Using Surface Mount, it is mounted. Package Tray contains it. There is a AVR as core processor in this device. It is important to keep the temperature at -40°C~85°C TA while working. Its type of program memory is FLASH. A total of 78 I/Os are available on this device. A comparable component can be found by using the base part number ATXMEGA128. BOTTOM is the position of its terminals on the board. It has 100 terminationals. AVR? XMEGA? A1 is the series number of this electrical component. The 3.3V supply voltage enables high efficiency. As for the uPs/uCs/peripheral ICs, this gadget has MICROCONTROLLER, RISC. 100 pins are used to construct it. During the mounting process, the device is mounted based on the Surface Mount method. Using the devices' 128kB memory size, you can store programs and data. When working at a frequency of 32MHz it is able to achieve excellent efficiency. 8 timer/counters are present. The property ALSO OPERATES AT 1.6V MINIMUM SUPPLY AT 12 MHZ is also present in it. Normally, the supply voltage (Vsup) should remain above 2.7V. The oscillator type Internal is used to operate the device.
ATXMEGA128A1-CU Features
100-TFBGA package
Mounting type of Surface Mount
ATXMEGA128A1-CU Applications
There are a lot of Microchip Technology ATXMEGA128A1-CU Microcontroller applications.
- X-ray
- Fire detection & safety devices
- Aerospace navigation systems
- Scanners
- Smartphone
- Leakage current tester
- Virtual reality VR robots
- Toys
- Smart highways (navigation, traffic control, information monitoring and car service)
- Glucose monitoring systems (for Type 1 Diabetes)
