ATXMEGA128A1U-CUR
| Parameters | |
|---|---|
| Terminal Position | BOTTOM |
| Terminal Form | BALL |
| Supply Voltage | 3V |
| Frequency | 32MHz |
| Base Part Number | ATXMEGA128 |
| Qualification Status | Not Qualified |
| Supply Voltage-Max (Vsup) | 3.6V |
| Supply Voltage-Min (Vsup) | 1.6V |
| Interface | EBI/EMI, I2C, IrDA, SPI, UART, USART, USB |
| Memory Size | 128kB |
| Oscillator Type | Internal |
| Number of I/O | 78 |
| RAM Size | 8K x 8 |
| Voltage - Supply (Vcc/Vdd) | 1.6V~3.6V |
| uPs/uCs/Peripheral ICs Type | MICROCONTROLLER, RISC |
| Core Processor | AVR |
| Peripherals | Brown-out Detect/Reset, DMA, POR, PWM, WDT |
| Program Memory Type | FLASH |
| Core Size | 8/16-Bit |
| Program Memory Size | 128KB 64K x 16 |
| Connectivity | EBI/EMI, I2C, IrDA, SPI, UART/USART, USB |
| Supply Current-Max | 12mA |
| Bit Size | 16 |
| Data Converter | A/D 16x12b; D/A 4x12b |
| Watchdog Timer | Yes |
| Has ADC | YES |
| DMA Channels | YES |
| PWM Channels | YES |
| DAC Channels | YES |
| Number of Timers/Counters | 8 |
| Address Bus Width | 24 |
| ROM (words) | 65536 |
| EEPROM Size | 2K x 8 |
| On Chip Program ROM Width | 16 |
| Boundary Scan | YES |
| Low Power Mode | NO |
| External Data Bus Width | 24 |
| Format | FIXED-POINT |
| Integrated Cache | NO |
| RAM (words) | 4096 |
| Number of Serial I/Os | 8 |
| On Chip Data RAM Width | 16 |
| Number of DMA Channels | 4 |
| Height Seated (Max) | 1.2mm |
| Length | 9mm |
| Width | 9mm |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
| Factory Lead Time | 1 Week |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 100-TFBGA |
| Number of Pins | 100 |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tape & Reel (TR) |
| Published | 2014 |
| Series | AVR® XMEGA® A1U |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 100 |
| Subcategory | Microcontrollers |
| Technology | CMOS |
ATXMEGA128A1U-CUR Overview
A space-saving advantage is that it is included in the 100-TFBGA package. In this case, it is mounted using the method of Surface Mount. You can find it in the package of Tape & Reel (TR). The device has a AVR core processor. Work should be performed at a temperature of -40°C~85°C TA. In terms of its program memory type, it is FLASH. There are 78 I/Os on it, which makes it a very simple device. It has a part number of ATXMEGA128 that can be used to locate similar components. BOTTOM is the location of its terminals. This circuit consists of 100 terminationals. Part of the AVR? XMEGA? A1U series, this electrical component is used in a variety of applications. This is due to the fact that the supply voltage is 3V, resulting in high efficiency. MICROCONTROLLER, RISC is the uPs/uCs/Peripheral IC chip in this gadget. A total of 100 pins are required to construct this device. It is mounted based on the method of Surface Mount. This is a component included in Microcontrollers. In the device, there is a memory capacity of 128kB which may be used to store programs and data. There is a maximum current supply of 12mA. The system is highly efficient when working at a frequency of 32MHz. 8 counters/timers are currently active. In order to maintain normal operation, Vsup must be above 1.6V. The oscillator type Internal is used to operate the device.
ATXMEGA128A1U-CUR Features
100-TFBGA package
Mounting type of Surface Mount
Microcontrollers subcategory
ATXMEGA128A1U-CUR Applications
There are a lot of Microchip Technology ATXMEGA128A1U-CUR Microcontroller applications.
- Digital set-top boxes
- Switches
- Firewalls
- Instrument control
- Printers
- Removable disks
- Electronic jamming systems
- Computer/laptop
- Toasters
- Blenders
