ATXMEGA128A3-AU
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Contact Plating | Tin |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 64-TQFP |
| Number of Pins | 64 |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tray |
| Published | 2009 |
| Series | AVR® XMEGA® A3 |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 64 |
| Termination | SMD/SMT |
| Technology | CMOS |
| Terminal Position | QUAD |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Supply Voltage | 3V |
| Frequency | 32MHz |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Base Part Number | ATXMEGA128 |
| Interface | I2C, IrDA, SPI, UART, USART |
| Memory Size | 128kB |
| Oscillator Type | Internal |
| Number of I/O | 50 |
| RAM Size | 8K x 8 |
| Voltage - Supply (Vcc/Vdd) | 1.6V~3.6V |
| uPs/uCs/Peripheral ICs Type | MICROCONTROLLER, RISC |
| Core Processor | AVR |
| Peripherals | Brown-out Detect/Reset, DMA, POR, PWM, WDT |
| Program Memory Type | FLASH |
| Core Size | 8/16-Bit |
| Program Memory Size | 128KB 64K x 16 |
| Connectivity | I2C, IrDA, SPI, UART/USART |
| Bit Size | 16 |
| Data Converter | A/D 16x12b; D/A 2x12b |
| Watchdog Timer | Yes |
| Has ADC | YES |
| DMA Channels | YES |
| Data Bus Width | 8b |
| Number of Timers/Counters | 7 |
| Density | 1 Mb |
| EEPROM Size | 2K x 8 |
| Number of ADC Channels | 8 |
| Number of PWM Channels | 22 |
| Number of I2C Channels | 2 |
| Number of SPI Channels | 3 |
| Height | 1.05mm |
| Length | 14.1mm |
| Width | 14.1mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
ATXMEGA128A3-AU Overview
As a result, it is available in the 64-TQFP package. It is mounted using the way of Surface Mount. It comes in a Tray package. It is equipped with a AVR core processor. It is important to keep the temperature at -40°C~85°C TA while working. In terms of its program memory type, it is FLASH. 50 I/Os are present on the device. To find comparable components, use the ATXMEGA128 base part number. At QUAD, it has its terminals. As far as terminations are concerned, there are 64 terminations present. An electrical component such as this is included in the series AVR? XMEGA? A3. The 3V supply voltage enables high efficiency. This gadget has MICROCONTROLLER, RISC as its uPs/uCs/Peripheral IC. It is constructed with 64 pins. The method of Surface Mount is used to mount it. In the device, there is a memory capacity of 128kB which may be used to store programs and data. At a frequency of 32MHz, it exhibits excellent efficiency. A total of 7 timers/counters are present. There is an oscillator type Internal used in this circuit.
ATXMEGA128A3-AU Features
64-TQFP package
Mounting type of Surface Mount
ATXMEGA128A3-AU Applications
There are a lot of Microchip Technology ATXMEGA128A3-AU Microcontroller applications.
- Electrocardiogram (EKG)
- Teletext terminals
- Blood pressure monitors
- Oscilloscopes
- Food and beverage
- Projectors
- Nintendo
- DCS control intelligent sensor
- Calculator
- Digital set-top boxes
