ATXMEGA128D3-AUR
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Contact Plating | Tin |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 64-TQFP |
| Number of Pins | 64 |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tape & Reel (TR) |
| Published | 2013 |
| Series | AVR® XMEGA® D3 |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 64 |
| Subcategory | Microcontrollers |
| Technology | CMOS |
| Terminal Position | QUAD |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Supply Voltage | 1.8V |
| Terminal Pitch | 0.8mm |
| Frequency | 10MHz |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Base Part Number | ATXMEGA128 |
| Qualification Status | Not Qualified |
| Supply Voltage-Max (Vsup) | 3.6V |
| Power Supplies | 1.8/3.3V |
| Supply Voltage-Min (Vsup) | 1.6V |
| Interface | I2C, IrDA, SPI, UART, USART |
| Memory Size | 1.8kB |
| Oscillator Type | Internal |
| Number of I/O | 50 |
| Speed | 32 MHz |
| RAM Size | 8K x 8 |
| Memory Type | FLASH, OTP |
| Voltage - Supply (Vcc/Vdd) | 1.6V~3.6V |
| uPs/uCs/Peripheral ICs Type | MICROCONTROLLER, RISC |
| Core Processor | AVR |
| Peripherals | Brown-out Detect/Reset, POR, PWM, WDT |
| Program Memory Type | FLASH |
| Core Size | 8/16-Bit |
| Program Memory Size | 128KB 64K x 16 |
| Connectivity | I2C, IrDA, SPI, UART/USART |
| Supply Current-Max | 18mA |
| Bit Size | 16 |
| Data Converter | A/D 16x12b |
| Watchdog Timer | Yes |
| Has ADC | YES |
| DMA Channels | NO |
| Data Bus Width | 8b |
| PWM Channels | YES |
| DAC Channels | NO |
| Number of Timers/Counters | 5 |
| ROM (words) | 131072 |
| EEPROM Size | 2K x 8 |
| Height Seated (Max) | 1.2mm |
| Length | 14mm |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
ATXMEGA128D3-AUR Overview
As a result, it is available in the 64-TQFP package. Surface Mount is used for mounting. It comes in the package?of a Tape & Reel (TR). It is equipped with a AVR core processor. In order to work effectively, the temperature should be kept at -40°C~85°C TA. The type of memory in which this program is stored is FLASH. It has a number of 50I/Os. It has a base part number of ATXMEGA128 that can be used to find other components that are comparable. QUAD is the position of its terminals on the board. As far as terminations are concerned, there are 64 terminations present. Part of the AVR? XMEGA? D3 series, this electrical component is used in a variety of applications. Using the 1.8V supply voltage allows for high efficiency. In terms of data storage, FLASH, OTP is used as the memory type. UPs/UCS/Peripheral ICs of this gadget are MICROCONTROLLER, RISC in order to monitor their performance. For its construction, 64 pins are used. During the mounting process, the device is mounted based on the Surface Mount method. It belongs to the subcategory Microcontrollers. In the device, there is a memory capacity of 1.8kB which may be used to store programs and data. It should be noted that 18mA represents the maximum supply current. Powered by a 1.8/3.3V source. At a frequency of 10MHz, it can achieve excellent efficiency. 5 timer/counters are present. During normal operation, the supply voltage (Vsup) should be kept above 1.6V. An oscillator of type Internal is used.
ATXMEGA128D3-AUR Features
64-TQFP package
Mounting type of Surface Mount
Microcontrollers subcategory
ATXMEGA128D3-AUR Applications
There are a lot of Microchip Technology ATXMEGA128D3-AUR Microcontroller applications.
- Auto-breaking system
- Instrument control
- Computed Tomography (CT scan)
- Projectors
- Ipod
- Mobile computers
- Food and beverage
- Fabric
- Binding machines
- Projector
