ATXMEGA192A3-AU
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Contact Plating | Tin |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 64-TQFP |
| Number of Pins | 64 |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tray |
| Published | 2010 |
| Series | AVR® XMEGA® A3 |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 64 |
| Technology | CMOS |
| Terminal Position | QUAD |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Supply Voltage | 3V |
| Frequency | 32MHz |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Base Part Number | ATXMEGA192 |
| Qualification Status | Not Qualified |
| Interface | I2C, IrDA, SPI, UART, USART |
| Memory Size | 192kB |
| Oscillator Type | Internal |
| Number of I/O | 50 |
| RAM Size | 16K x 8 |
| Voltage - Supply (Vcc/Vdd) | 1.6V~3.6V |
| uPs/uCs/Peripheral ICs Type | MICROCONTROLLER, RISC |
| Core Processor | AVR |
| Peripherals | Brown-out Detect/Reset, DMA, POR, PWM, WDT |
| Program Memory Type | FLASH |
| Core Size | 8/16-Bit |
| Program Memory Size | 192KB 96K x 16 |
| Connectivity | I2C, IrDA, SPI, UART/USART |
| Bit Size | 16 |
| Data Converter | A/D 16x12b; D/A 2x12b |
| Watchdog Timer | Yes |
| Has ADC | YES |
| DMA Channels | YES |
| Data Bus Width | 8b |
| Number of Timers/Counters | 7 |
| EEPROM Size | 2K x 8 |
| Number of ADC Channels | 8 |
| Number of PWM Channels | 6 |
| Number of I2C Channels | 2 |
| Number of SPI Channels | 3 |
| Height | 1.05mm |
| Length | 14.1mm |
| Width | 14.1mm |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
ATXMEGA192A3-AU Overview
For space savings, it is available in the 64-TQFP package. The way of Surface Mount is used to mount it. A package of Tray contains it. A core processor of AVR is present in the device. The temperature should be kept at -40°C~85°C TA while working. FLASH is the type of program memory used by it. A total of 50 I/Os are present. A comparable component can be found by using the base part number ATXMEGA192. QUAD is the position of its terminals on the board. In this case, there are 64 terminationals. An electrical component such as this is included in the series AVR? XMEGA? A3. Because the supply voltage is 3V, high efficiency can be achieved. This gadget has MICROCONTROLLER, RISC as its uPs/uCs/Peripheral IC. A number of 64 pins are used to construct it. During the mounting process, the device is mounted based on the Surface Mount method. It is possible to store programs and data on the devices, as they have a memory size of 192kB. When working at a frequency of 32MHz it is able to achieve excellent efficiency. In total, there are 7 timers and counters. Internal is the oscillator type it uses.
ATXMEGA192A3-AU Features
64-TQFP package
Mounting type of Surface Mount
ATXMEGA192A3-AU Applications
There are a lot of Microchip Technology ATXMEGA192A3-AU Microcontroller applications.
- Tape drives
- Plant factories (special plant factories, soilless cultivation technology, smart seed engineering)
- Microwave ovens
- Heart rate monitors
- Fire alarms
- Copiers
- Torpedo guidance
- Aerospace navigation systems
- Dialysis machines (performs function of liver)
- Smart highways (navigation, traffic control, information monitoring and car service)
