ATXMEGA192D3-MH
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Contact Plating | Tin |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 64-VFQFN Exposed Pad |
| Number of Pins | 64 |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tray |
| Published | 2010 |
| Series | AVR® XMEGA® D3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 64 |
| Subcategory | Microcontrollers |
| Technology | CMOS |
| Terminal Position | QUAD |
| Terminal Form | NO LEAD |
| Supply Voltage | 1.8V |
| Frequency | 32MHz |
| Base Part Number | ATXMEGA192 |
| Qualification Status | Not Qualified |
| Operating Supply Voltage | 2.5V |
| Supply Voltage-Max (Vsup) | 3.6V |
| Power Supplies | 1.8/3.3V |
| Interface | I2C, IrDA, SPI, UART, USART |
| Memory Size | 192kB |
| Oscillator Type | Internal |
| Number of I/O | 50 |
| RAM Size | 16K x 8 |
| Voltage - Supply (Vcc/Vdd) | 1.6V~3.6V |
| uPs/uCs/Peripheral ICs Type | MICROCONTROLLER, RISC |
| Core Processor | AVR |
| Peripherals | Brown-out Detect/Reset, POR, PWM, WDT |
| Program Memory Type | FLASH |
| Core Size | 8/16-Bit |
| Program Memory Size | 192KB 96K x 16 |
| Connectivity | I2C, IrDA, SPI, UART/USART |
| Supply Current-Max | 18mA |
| Bit Size | 16 |
| Data Converter | A/D 16x12b |
| Watchdog Timer | Yes |
| Has ADC | YES |
| DMA Channels | NO |
| Data Bus Width | 8b |
| PWM Channels | YES |
| DAC Channels | NO |
| Number of Timers/Counters | 5 |
| ROM (words) | 196608 |
| EEPROM Size | 2K x 8 |
| Height Seated (Max) | 1mm |
| Length | 9mm |
| RoHS Status | ROHS3 Compliant |
ATXMEGA192D3-MH Overview
A space-saving advantage is that it is included in the 64-VFQFN Exposed Pad package. The way of mounting it is Surface Mount. It comes in a Tray package. The device runs in AVR core processor. Maintain a temperature of -40°C~85°C TA while working. FLASH is the type of program memory used by it. A total of 50 I/Os are present. In order to find similar components, it has a base part number of ATXMEGA192. The position of the device is QUAD at terminal. It has 64 terminationals. In the AVR? XMEGA? D3 series, this electrical component is found. By using a 1.8V voltage supply, high efficiency is possible. UPs/UCS/Peripheral ICs of this gadget are MICROCONTROLLER, RISC in order to monitor their performance. There are 64 pins used in the construction of this device. This mount is done in accordance with the method of Surface Mount. It falls under the category of Microcontrollers. A device with a memory size of 192kB can store programs and data. Supply current is maximum at 18mA. A 1.8/3.3V power source powers it. The system is highly efficient when working at a frequency of 32MHz. The supply voltage of 2.5V's adaptability can be fully utilised by designers. There are 5 timers/counters. There is an oscillator type Internal used in this circuit.
ATXMEGA192D3-MH Features
64-VFQFN Exposed Pad package
Mounting type of Surface Mount
Microcontrollers subcategory
ATXMEGA192D3-MH Applications
There are a lot of Microchip Technology ATXMEGA192D3-MH Microcontroller applications.
- Tape drives
- Graphic terminals
- Fax machines
- Speed meter
- Electronic jamming systems
- Accu-check
- Instrument control
- Answering machines
- Electrocardiogram (EKG)
- Removable disks
