ATXMEGA32C4-AU
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Contact Plating | Tin |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 44-TQFP |
| Number of Pins | 44 |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tray |
| Published | 2014 |
| Series | AVR® XMEGA® C4 |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 44 |
| Additional Feature | ITS ALSO OPERATES AT 1.6V AT 12 MHZ |
| Subcategory | Microcontrollers |
| Technology | CMOS |
| Terminal Position | QUAD |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Supply Voltage | 3.3V |
| Terminal Pitch | 0.8mm |
| Frequency | 32MHz |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Base Part Number | ATXMEGA32 |
| Qualification Status | Not Qualified |
| Supply Voltage-Max (Vsup) | 3.6V |
| Power Supplies | 1.8/3.3V |
| Supply Voltage-Min (Vsup) | 2.7V |
| Interface | I2C, IrDA, SPI, UART, USART, USB |
| Memory Size | 32kB |
| Oscillator Type | Internal |
| Number of I/O | 34 |
| RAM Size | 4K x 8 |
| Voltage - Supply (Vcc/Vdd) | 1.6V~3.6V |
| uPs/uCs/Peripheral ICs Type | MICROCONTROLLER, RISC |
| Core Processor | AVR |
| Peripherals | Brown-out Detect/Reset, POR, PWM, WDT |
| Program Memory Type | FLASH |
| Core Size | 8/16-Bit |
| Program Memory Size | 32KB 16K x 16 |
| Connectivity | I2C, IrDA, SPI, UART/USART, USB |
| Supply Current-Max | 12mA |
| Bit Size | 16 |
| Data Converter | A/D 16x12b |
| Watchdog Timer | Yes |
| Has ADC | YES |
| DMA Channels | YES |
| Data Bus Width | 8b |
| PWM Channels | YES |
| DAC Channels | NO |
| Number of Timers/Counters | 4 |
| EEPROM Size | 1K x 8 |
| Number of Programmable I/O | 32 |
| Height Seated (Max) | 1.2mm |
| Length | 10mm |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
ATXMEGA32C4-AU Overview
As a result, it is available in the 44-TQFP package. A Surface Mount mounting method is used. In the package Tray, it is included. AVR core processor is present on the device. Maintain a temperature of -40°C~85°C TA while working. FLASH is its program memory type. 34 I/Os are present on the device. Based on the ATXMEGA32 base part number, it can be compared with other components. The terminals of this device are set to QUAD. As far as terminations are concerned, there are 44 terminations present. The electrical component is part of the series AVR? XMEGA? C4. Because of the 3.3V voltage of the supply, high efficiency can be achieved. In this gadget, MICROCONTROLLER, RISC is the device's uPs/uCs/Peripheral IC. It is constructed using 44 pins. As a result, it is mounted in accordance with Surface Mount. It falls under the category of Microcontrollers. In the device, there is a memory capacity of 32kB which may be used to store programs and data. It is important to note that the maximum supply current is 12mA. There is 1.8/3.3V power source in this device. This device works well at 32MHz frequency when it is operating at a high rate of efficiency. A total of 4 timers/counters have been set up. The number of programmable inputs and outputs is 32. It has the property of ITS ALSO OPERATES AT 1.6V AT 12 MHZ as well. In order to ensure normal operation, the supply voltage (Vsup) must remain above 2.7V. An oscillator of type Internal is used.
ATXMEGA32C4-AU Features
44-TQFP package
Mounting type of Surface Mount
Microcontrollers subcategory
ATXMEGA32C4-AU Applications
There are a lot of Microchip Technology ATXMEGA32C4-AU Microcontroller applications.
- Wastewater treatment
- Virtual reality VR robots
- Hard drives
- Xbox
- Fabric
- Industrial instrumentation devices
- Leakage current tester
- Playstation
- Nintendo
- Robotic prosthetic limbs
