ATXMEGA32E5-M4U
| Parameters | |
|---|---|
| Supply Voltage-Max (Vsup) | 3.6V |
| Power Supplies | 1.8/3.3V |
| Supply Voltage-Min (Vsup) | 1.6V |
| Interface | 2-Wire, I2C, IrDA, SPI, UART, USART |
| Memory Size | 32kB |
| Oscillator Type | Internal |
| Number of I/O | 26 |
| RAM Size | 4K x 8 |
| Memory Type | FLASH, SRAM |
| Voltage - Supply (Vcc/Vdd) | 1.6V~3.6V |
| uPs/uCs/Peripheral ICs Type | MICROCONTROLLER, RISC |
| Core Processor | AVR |
| Peripherals | Brown-out Detect/Reset, DMA, POR, PWM, WDT |
| Program Memory Type | FLASH |
| Core Size | 8/16-Bit |
| Program Memory Size | 32KB 16K x 16 |
| Connectivity | I2C, IrDA, SPI, UART/USART |
| Supply Current-Max | 10mA |
| Bit Size | 16 |
| Data Converter | A/D 16x12b; D/A 2x12b |
| Watchdog Timer | Yes |
| Has ADC | YES |
| DMA Channels | YES |
| Data Bus Width | 8b |
| PWM Channels | YES |
| Number of Timers/Counters | 5 |
| EEPROM Size | 1K x 8 |
| On Chip Program ROM Width | 16 |
| Boundary Scan | NO |
| Low Power Mode | NO |
| Format | FIXED-POINT |
| Integrated Cache | NO |
| RAM (words) | 2048 |
| Number of ADC Channels | 16 |
| Number of Serial I/Os | 2 |
| Number of External Interrupts | 2 |
| On Chip Data RAM Width | 16 |
| Height Seated (Max) | 0.6mm |
| Length | 4mm |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Factory Lead Time | 1 Week |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 32-UFQFN Exposed Pad |
| Number of Pins | 32 |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tray |
| Published | 2013 |
| Series | AVR® XMEGA® E5 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 32 |
| Subcategory | Microcontrollers |
| Technology | CMOS |
| Terminal Position | QUAD |
| Terminal Form | NO LEAD |
| Supply Voltage | 1.8V |
| Terminal Pitch | 0.4mm |
| Frequency | 32MHz |
| Base Part Number | ATXMEGA32 |
| Qualification Status | Not Qualified |
ATXMEGA32E5-M4U Overview
A space-saving advantage is that it is included in the 32-UFQFN Exposed Pad package. It is mounted using the way of Surface Mount. It comes in the package?of a Tray. The device has a AVR core processor. Work should be done at -40°C~85°C TA. Memory type FLASH is used for program memory. The device has 26 I/Os. A comparable component can be found by using the base part number ATXMEGA32. The position of the device is QUAD at terminal. A 32 termination is contained within it. This electrical component is part of the AVR? XMEGA? E5 series. High efficiency is possible due to the 1.8V supply voltage. The type of memory used for data storage is FLASH, SRAM. It has uPs/uCs/Peripheral IC - MICROCONTROLLER, RISC. The structure is composed of 32 pins. It is mounted based on the method of Surface Mount. Subcategory Microcontrollers includes this component. Using the devices' 32kB memory size, you can store programs and data. 10mA is the maximum supply current. It is powered by a 1.8/3.3V?source. Working at a frequency of 32MHz results in excellent efficiency. The number of timers and counters is 5. In order to ensure normal operation, the supply voltage (Vsup) must remain above 1.6V. Internal is the oscillator type it uses.
ATXMEGA32E5-M4U Features
32-UFQFN Exposed Pad package
Mounting type of Surface Mount
Microcontrollers subcategory
ATXMEGA32E5-M4U Applications
There are a lot of Microchip Technology ATXMEGA32E5-M4U Microcontroller applications.
- Broadband technology, video and voice processing
- Pacemakers (used to control abnormal heart rhythm)
- X-ray
- Smartphones-calling, video calling, texting, email
- Projectors
- Fax machines
- Radio
- Smartphone
- Smart highways (navigation, traffic control, information monitoring and car service)
- Oil and gas
