ATXMEGA64B3-AU
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 64-TQFP |
| Number of Pins | 64 |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tray |
| Published | 2012 |
| Series | AVR® XMEGA® B3 |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 64 |
| Terminal Finish | Matte Tin (Sn) |
| Subcategory | Microcontrollers |
| Technology | CMOS |
| Terminal Position | QUAD |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Supply Voltage | 3V |
| Terminal Pitch | 0.8mm |
| Frequency | 32MHz |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Base Part Number | ATXMEGA64 |
| Qualification Status | Not Qualified |
| Power Supplies | 1.8/3.3V |
| Interface | I2C, IrDA, SPI, UART, USART, USB |
| Memory Size | 64kB |
| Oscillator Type | Internal |
| Number of I/O | 36 |
| RAM Size | 4K x 8 |
| Voltage - Supply (Vcc/Vdd) | 1.6V~3.6V |
| uPs/uCs/Peripheral ICs Type | MICROCONTROLLER, RISC |
| Core Processor | AVR |
| Peripherals | Brown-out Detect/Reset, DMA, LCD, POR, PWM, WDT |
| Program Memory Type | FLASH |
| Core Size | 8/16-Bit |
| Program Memory Size | 64KB 32K x 16 |
| Connectivity | I2C, IrDA, SPI, UART/USART, USB |
| Bit Size | 16 |
| Data Converter | A/D 8x12b |
| Watchdog Timer | Yes |
| Has ADC | YES |
| DMA Channels | YES |
| Data Bus Width | 8b |
| DAC Channels | NO |
| Number of Timers/Counters | 2 |
| EEPROM Size | 2K x 8 |
| Number of PWM Channels | 6 |
| Length | 14mm |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
ATXMEGA64B3-AU Overview
A space-saving advantage is that it is included in the 64-TQFP package. The way of Surface Mount is used to mount it. It comes in the package?of a Tray. There is a AVR as core processor in this device. Working at -40°C~85°C TA temperature is recommended. FLASH is the type of program memory used by it. It has a number of 36I/Os. Based on its base part number of ATXMEGA64, other similarly-sized components can be found. QUAD is the position of its terminals on the board. Currently, it consists of 64 terminationals. It is a member of the AVR? XMEGA? B3 series of electrical components. Because the supply voltage is 3V, high efficiency can be achieved. MICROCONTROLLER, RISC is the uPs/uCs/Peripheral IC chip in this gadget. There are 64 pins used in the construction of this device. It is mounted based on the method of Surface Mount. Microcontrollers contains this component. In the device, there is a memory capacity of 64kB which may be used to store programs and data. A 1.8/3.3V source of power is being used to run it. Working at a frequency of 32MHz results in excellent efficiency. A total of 2 timers/counters are present. Using a Internal oscillator type, it works well.
ATXMEGA64B3-AU Features
64-TQFP package
Mounting type of Surface Mount
Microcontrollers subcategory
ATXMEGA64B3-AU Applications
There are a lot of Microchip Technology ATXMEGA64B3-AU Microcontroller applications.
- Industrial robot
- Data acquisition and control
- Blenders
- Microwave ovens
- Virtual reality VR robots
- Mobile computers
- Sonography (Ultrasound imaging)
- Industrial instrumentation devices
- Traditional industrial transformation
- Computed Tomography (CT scan)
