AU5517DR2G
| Parameters | |
|---|---|
| Number of Elements | 2 |
| Power Supplies | +-15V |
| Number of Circuits | 2 |
| Operating Supply Current | 2.6mA |
| Power Dissipation | 1.125W |
| Supply Current-Max | 4mA |
| Slew Rate | 50V/μs |
| Amplifier Type | Transconductance |
| Common Mode Rejection Ratio | 80 dB |
| Current - Input Bias | 400nA |
| Max Input Voltage | -3V |
| Voltage - Supply, Single/Dual (±) | 4V~44V ±2V~22V |
| Halogen Free | Halogen Free |
| Output Current per Channel | 650μA |
| Supply Type | Dual, Single |
| Input Offset Voltage (Vos) | 5mV |
| Neg Supply Voltage-Nom (Vsup) | -15V |
| Average Bias Current-Max (IIB) | 8μA |
| Low-Offset | NO |
| Frequency Compensation | YES |
| Voltage - Input Offset | 400μV |
| Bias Current-Max (IIB) @25C | 5μA |
| Nominal Gain Bandwidth Product | 2MHz |
| Height Seated (Max) | 1.75mm |
| Length | 9.9mm |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 2 days ago) |
| Contact Plating | Tin |
| Mounting Type | Surface Mount |
| Package / Case | 16-SOIC (0.154, 3.90mm Width) |
| Surface Mount | YES |
| Number of Pins | 16 |
| Weight | 665.986997mg |
| Operating Temperature | -40°C~125°C |
| Packaging | Tape & Reel (TR) |
| Published | 2012 |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 16 |
| ECCN Code | EAR99 |
| Subcategory | Operational Amplifiers |
| Packing Method | TAPE AND REEL |
| Max Power Dissipation | 1.125W |
| Technology | BIPOLAR |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 2 |
| Supply Voltage | 15V |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Base Part Number | AU5517 |
| Pin Count | 16 |
| Qualification Status | Not Qualified |
| Output Type | Push-Pull |
AU5517DR2G Overview
A 16-SOIC (0.154, 3.90mm Width) case is used to package the op amp. Transconductance-type instrumentation amplifiers are used in this application. Upon delivery, op amp ic is packaged in a Tape & Reel (TR) case. We are approaching the 16h termination of the year. The total number of pins on linear amplifier is 16. I would like you to keep in mind that this buffer amplifier needs to be run at a voltage of 15V. It should be noted that this type of buffer amplifier is exactly what is known as a Operational Amplifiers device. 16 pins are included on the operational amplifiers. As far as the input offset voltage is concerned, linear amplifier rates at 5mV. The mounting type that is recommended for this electrical part is Surface Mount. According to the manufacturer, this buffer op amp works well at -40°C~125°C , which is a good operating temperature. An 2.6mA volt supply current is needed for this linear amplifier to operate. There are 2 circuits on this op amp. Buffer amplifier produces Push-Pull signals, which is one of its many benefits. Op amp has total of 2 elements. For packing the buffer amplifier, the TAPE AND REEL-axis is adopted.
AU5517DR2G Features
16 Pins
supply voltage of 15V
Output Type: Push-Pull
AU5517DR2G Applications
There are a lot of ON Semiconductor AU5517DR2G Instrumentational OP Amps applications.
- Signal transformation
- MP3
- Test equipment
- Voltage regulation circuit
- Portable electronic products powered by batteries
- Large motor controllers
- Automatic control
- PDA
- Hand-held batteries
- RF cable systems
