banner_page

AUIPS1011

6/28V N-Channel 2.54mm PMIC Automotive, AEC-Q100 Series AUIPS1011 3 Pin 14V TO-220-3


  • Manufacturer: Infineon Technologies
  • Nocochips NO: 376-AUIPS1011
  • Package: TO-220-3
  • Datasheet: PDF
  • Stock: 431
  • Description: 6/28V N-Channel 2.54mm PMIC Automotive, AEC-Q100 Series AUIPS1011 3 Pin 14V TO-220-3 (Kg)

Details

Tags

Parameters
Factory Lead Time 1 Week
Mount Through Hole
Mounting Type Through Hole
Package / Case TO-220-3
Number of Pins 3
Operating Temperature -40°C~150°C TJ
Packaging Tube
Published 2011
Series Automotive, AEC-Q100
Part Status Obsolete
Moisture Sensitivity Level (MSL) 1 (Unlimited)
Number of Terminations 3
ECCN Code EAR99
Resistance 10mOhm
Subcategory Peripheral Drivers
Max Power Dissipation 25W
Terminal Position SINGLE
Number of Functions 1
Supply Voltage 14V
Terminal Pitch 2.54mm
Base Part Number AUIPS1011
Number of Outputs 1
Output Type N-Channel
Max Output Current 18A
Power Supplies 6/28V
Voltage 5.5V
Interface On/Off
Current 18A
Output Configuration Low Side
Power Dissipation 25W
Output Current 18A
Voltage - Supply (Vcc/Vdd) Not Required
Input Type Non-Inverting
Turn On Delay Time 150 μs
Switch Type General Purpose
Clamping Voltage 39V
Rise Time 50μs
Fall Time (Typ) 70 μs
Nominal Input Voltage 5.5V
Turn-Off Delay Time 700 μs
Ratio - Input:Output 1:1
Voltage - Load 36V Max
Driver Number of Bits 1
Fault Protection Current Limiting (Fixed), Over Temperature
Rds On (Typ) 10m Ω
Built-in Protections TRANSIENT; OVER CURRENT; THERMAL
Height 4.82mm
Length 10.66mm
Width 9.02mm
Radiation Hardening No
REACH SVHC No SVHC
RoHS Status RoHS Compliant
Lead Free Lead Free

AUIPS1011 Overview


It is packaged in the manner of a Tube.The TO-220-3 package includes it.The mounting type of the LED driver is Through Hole.There is a General Purpose switch type associated with it.It is best to set the temperature to -40°C~150°C TJ to ensure reliable operation.There are 1 outputs available on this lighting driver.Operation is based on Not Required supply voltage.It has a maximum output voltage of N-Channel volts.This object belongs to the AUIPS1011 family.It contains 3 terminations.For operation, we use the 3 pins.As far as the lighting driver is concerned, there are 1 functions.This results in the maximum output current dropping to 18A to meet the operation criteria.A supply voltage of 14V leads to high efficiency.This lighting driver is mounted in the way of Through Hole.There is 10mOhm resistance on the LED driver.Electrical components such as this are included in the Automotive, AEC-Q100 series.When this case is used, the output current is set to 18A.A self-contained container with a capacity of Peripheral Drivers contains this lighting driver.A 6/28V power supply is used by the part.

AUIPS1011 Features


Supplied from 14V
Resistance of 10mOhm

AUIPS1011 Applications


There are a lot of Infineon Technologies AUIPS1011 Power Switches ICs applications.

  • Hot Swaps
  • USB Power Distribution
  • Storage (HDDs, SSDs)
  • Wireless Headsets
  • Storage Drives
  • Smartphone and PDA
  • Handheld Devices
  • Solid-State Drives
  • Notebook PC
  • Portable Video Game Players

Write a review

Note: HTML is not translated!
    Bad           Good