AUIPS1011R
| Parameters | |
|---|---|
| Mounting Type | Surface Mount |
| Package / Case | TO-252-3, DPak (2 Leads + Tab), SC-63 |
| Surface Mount | YES |
| Operating Temperature | -40°C~150°C TJ |
| Packaging | Tube |
| Published | 2011 |
| Series | Automotive, AEC-Q100 |
| JESD-609 Code | e3 |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 2 |
| ECCN Code | EAR99 |
| Terminal Finish | Matte Tin (Sn) - with Nickel (Ni) barrier |
| Subcategory | Peripheral Drivers |
| Terminal Position | SINGLE |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 14V |
| Terminal Pitch | 2.29mm |
| Reach Compliance Code | compliant |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | AUIPS1011R |
| JESD-30 Code | R-PSSO-G2 |
| Number of Outputs | 1 |
| Qualification Status | Not Qualified |
| Output Type | N-Channel |
| Supply Voltage-Max (Vsup) | 28V |
| Power Supplies | 6/28V |
| Supply Voltage-Min (Vsup) | 6V |
| Interface | On/Off |
| Current - Output (Max) | 6A |
| Output Configuration | Low Side |
| Voltage - Supply (Vcc/Vdd) | Not Required |
| Input Type | Non-Inverting |
| Switch Type | General Purpose |
| Ratio - Input:Output | 1:1 |
| Voltage - Load | 36V Max |
| Driver Number of Bits | 1 |
| Fault Protection | Current Limiting (Fixed), Over Temperature |
| Rds On (Typ) | 10m Ω |
| Turn Off Time | 700 µs |
| Built-in Protections | TRANSIENT; OVER CURRENT; THERMAL |
| Output Current Flow Direction | SOURCE SINK |
| Height Seated (Max) | 2.3mm |
| Length | 6.54mm |
| Width | 6.095mm |
| RoHS Status | RoHS Compliant |
AUIPS1011R Overview
As you can see, it's packaged in the way of a Tube.The TO-252-3, DPak (2 Leads + Tab), SC-63 package contains it.This LED driving board is mounted using the mounting type Surface Mount.The switch type is General Purpose.To ensure reliable operation, the temperature should be set to -40°C~150°C TJ.There is a default setting of 1 for output.Operation is based on a supply voltage of Not Required.A maximum output voltage of N-Channel volts can be obtained with this LED driver.The AUIPS1011R family contains this object.As a result, there are 2 terminations.As far as the lighting driver is concerned, there are 1 functions.This lighting driver is capable of delivering a maximum output of 6A volts.As long as the supply voltage is 14V, high efficiency can be achieved.This electrical component is included in the Automotive, AEC-Q100 series.It is self-contained in an econtainer with a capacity of Peripheral Drivers.The maximum supply voltage for this LED driver is 28V (Vsup).Normal operation requires Vsup above 6V.This part is powered by 6/28V.
AUIPS1011R Features
Supplied from 14V
AUIPS1011R Applications
There are a lot of Infineon Technologies AUIPS1011R Power Switches ICs applications.
- Portable GPS Device
- USB Ports/Hubs
- USB Power Distribution
- Notebook PC
- Notebook and Tablet Computers
- Gaming
- Solid State Drivers
- PDAs
- Storage Drives
- Wearable Devices
