banner_page

AUIPS1021

6/28V N-Channel 2.54mm PMIC Automotive, AEC-Q100 Series AUIPS1021 3 Pin 14V TO-220-3


  • Manufacturer: Infineon Technologies
  • Nocochips NO: 376-AUIPS1021
  • Package: TO-220-3
  • Datasheet: PDF
  • Stock: 226
  • Description: 6/28V N-Channel 2.54mm PMIC Automotive, AEC-Q100 Series AUIPS1021 3 Pin 14V TO-220-3 (Kg)

Details

Tags

Parameters
Rise Time 30μs
Fall Time (Typ) 30 μs
Nominal Input Voltage 6V
Turn-Off Delay Time 400 μs
Ratio - Input:Output 1:1
Voltage - Load 36V Max
Driver Number of Bits 1
Fault Protection Current Limiting (Fixed), Over Temperature
Rds On (Typ) 20m Ω
Built-in Protections TRANSIENT; OVER CURRENT; OVER VOLTAGE; THERMAL
Height 4.82mm
Length 10.66mm
Width 9.02mm
Radiation Hardening No
REACH SVHC No SVHC
RoHS Status RoHS Compliant
Lead Free Lead Free
Factory Lead Time 1 Week
Mount Through Hole
Mounting Type Through Hole
Package / Case TO-220-3
Number of Pins 3
Operating Temperature -40°C~150°C TJ
Packaging Tube
Published 2010
Series Automotive, AEC-Q100
Part Status Obsolete
Moisture Sensitivity Level (MSL) 1 (Unlimited)
Number of Terminations 3
ECCN Code EAR99
Resistance 20mOhm
Subcategory Peripheral Drivers
Max Power Dissipation 25W
Technology MOS
Terminal Position SINGLE
Number of Functions 1
Supply Voltage 14V
Terminal Pitch 2.54mm
Current Rating 4.5A
Base Part Number AUIPS1021
Number of Outputs 1
Output Type N-Channel
Max Output Current 13.5A
Power Supplies 6/28V
Voltage 5.5V
Interface On/Off
Nominal Supply Current 45A
Current 13.5A
Output Configuration Low Side
Power Dissipation 25W
Output Current 13.5A
Voltage - Supply (Vcc/Vdd) Not Required
Input Type Non-Inverting
Turn On Delay Time 100 μs
Switch Type General Purpose
Clamping Voltage 39V

AUIPS1021 Overview


The LED driver's packaged as a Tube.The TO-220-3 package contains it.The lighting driver is mounted in the Through Hole position.This switch is of type General Purpose.Keeping the temperature at -40°C~150°C TJ ensures reliable operation.The LED driver is equipped with 1 outputs.To operate, it needs a supply voltage of Not Required.It has a maximum output voltage of N-Channel volts.It comes under the family of AUIPS1021.It consists of 3 terminations in total.For operation, 3 pins are used.The LED driving board has a total of 1 functions.To meet the operation criteria, the maximum output current drops to 13.5A.Using a voltage of 14V allows for high efficiency.The LED driving board is mounted in the way of Through Hole.In this case, there is 20mOhm resistance in the LED driving board.It is included in the Automotive, AEC-Q100 series.The output current is set to 13.5A in this case.This LED driver is self-contained in an econtainer with a capacity of Peripheral Drivers.In this part, the power supply is set to 6/28V.

AUIPS1021 Features


Supplied from 14V
Resistance of 20mOhm

AUIPS1021 Applications


There are a lot of Infineon Technologies AUIPS1021 Power Switches ICs applications.

  • Set-Top Boxes
  • Wireless Modem Data Cards
  • Notebook and Tablet Computers
  • HDD and SSD
  • Notebook PC
  • Telecom and Network Systems
  • Smart Phones, Feature Phones
  • USB Protection
  • Low Voltage I/O System Power
  • PDAs

Write a review

Note: HTML is not translated!
    Bad           Good