AUIPS1021R
| Parameters | |
|---|---|
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | TO-252-3, DPak (2 Leads + Tab), SC-63 |
| Number of Pins | 3 |
| Operating Temperature | -40°C~150°C TJ |
| Packaging | Tube |
| Published | 2009 |
| Series | Automotive, AEC-Q100 |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 3 |
| ECCN Code | EAR99 |
| Resistance | 25MOhm |
| Subcategory | Peripheral Drivers |
| Max Power Dissipation | 2.5W |
| Technology | MOS |
| Terminal Position | SINGLE |
| Current Rating | 4.5A |
| Base Part Number | AUIPS1021R |
| Number of Outputs | 1 |
| Output Type | N-Channel |
| Max Output Current | 4.3A |
| Power Supplies | 6/28V |
| Voltage | 5.5V |
| Interface | On/Off |
| Current | 4.3A |
| Output Configuration | Low Side |
| Power Dissipation | 2.5W |
| Output Current | 4.3A |
| Voltage - Supply (Vcc/Vdd) | Not Required |
| Input Type | Non-Inverting |
| Switch Type | General Purpose |
| Clamping Voltage | 39V |
| Ratio - Input:Output | 1:1 |
| Voltage - Load | 36V Max |
| Driver Number of Bits | 1 |
| Fault Protection | Current Limiting (Fixed), Over Temperature |
| Rds On (Typ) | 20m Ω |
| Height | 4.83mm |
| Length | 6.3mm |
| Width | 9.65mm |
| Radiation Hardening | No |
| RoHS Status | RoHS Compliant |
| Lead Free | Lead Free |
AUIPS1021R Overview
It's?packaged?in?the way?of?a?Tube.In the TO-252-3, DPak (2 Leads + Tab), SC-63 package, it is included.Mounting type Surface Mount is selected for the LED driving board.It owns the General Purpose switch type.It is recommended to set the temperature to -40°C~150°C TJ in order to ensure reliable operation.It is possible to use 1 outputs in the lighting driver.It uses a supply voltage of Not Required to operate.It produces a maximum output voltage of N-Channel volts at its maximum output.It is part of the AUIPS1021R family of LED drivers.The termination count is 3.For operation, we use the 3 pins.To meet the operation criteria, the maximum output current drops to 4.3A.Surface Mount is mounted in the way.In this case, there is 25MOhm resistance in the LED driving board.A component of this type is included in the Automotive, AEC-Q100 series.This results in a 4.3A output current.The LED driver is self-contained in an econtainer with Peripheral Drivers capacity.This part is powered by 6/28V.
AUIPS1021R Features
Resistance of 25MOhm
AUIPS1021R Applications
There are a lot of Infineon Technologies AUIPS1021R Power Switches ICs applications.
- Set-Top Boxes
- Wireless Modem Data Cards
- Portable Video Game Players
- Portable GPS
- Various applications equipped with buttons
- Portable GPS Device
- HDD and SSD
- PC Card Hot Swap
- USB Protection
- Low Voltage I/O System Power
