AUIPS1031
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mount | Surface Mount, Through Hole |
| Mounting Type | Through Hole |
| Package / Case | TO-220-3 |
| Number of Pins | 3 |
| Operating Temperature | -40°C~150°C TJ |
| Packaging | Tube |
| Published | 2011 |
| Series | Automotive, AEC-Q100 |
| JESD-609 Code | e3 |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 3 |
| ECCN Code | EAR99 |
| Resistance | 40mOhm |
| Terminal Finish | MATTE TIN OVER NICKEL |
| Subcategory | Peripheral Drivers |
| Max Power Dissipation | 25W |
| Terminal Position | SINGLE |
| Peak Reflow Temperature (Cel) | 250 |
| Number of Functions | 1 |
| Supply Voltage | 14V |
| Terminal Pitch | 2.54mm |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | AUIPS1031 |
| Number of Outputs | 1 |
| Output Type | N-Channel |
| Max Output Current | 9.5A |
| Power Supplies | 6/28V |
| Voltage | 5.5V |
| Interface | On/Off |
| Current | 9.5A |
| Output Configuration | Low Side |
| Power Dissipation | 25W |
| Output Current | 9.5A |
| Voltage - Supply (Vcc/Vdd) | Not Required |
| Input Type | Non-Inverting |
| Switch Type | General Purpose |
| Min Input Voltage | -300mV |
| Max Input Voltage | 6V |
| Nominal Input Voltage | 6V |
| Ratio - Input:Output | 1:1 |
| Voltage - Load | 36V Max |
| Driver Number of Bits | 1 |
| Fault Protection | Current Limiting (Fixed), Over Temperature |
| Rds On (Typ) | 40m Ω |
| Turn Off Time | 200 μs |
| Built-in Protections | TRANSIENT; OVER CURRENT; OVER VOLTAGE; THERMAL |
| Height | 4.82mm |
| Length | 10.66mm |
| Width | 9.02mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | RoHS Compliant |
| Lead Free | Lead Free |
AUIPS1031 Overview
The package is in the form of a Tube.It is included in the package TO-220-3.The LED driver is mounted as Through Hole.General Purpose is the switch type it owns.It is recommended to set the temperature to -40°C~150°C TJ in order to ensure reliable operation.As a default, the output is set to 1.It uses a supply voltage of Not Required to operate.The maximum output voltage is N-Channel volts.The AUIPS1031 family contains this object.A total of 3 terminations have been found in it.The 3 pins are used to operate the LED driver.It contains 1 functions.The maximum output current must drop to 9.5A to meet the operation criteria.A supply voltage of 14V leads to high efficiency.Surface Mount, Through Hole is mounted in the way of this LED driving board.In this case, there is 40mOhm resistance in the LED driving board.This electrical component is included in the Automotive, AEC-Q100 series.In this case, the output current is set to 9.5A.Self-contained LED driver with Peripheral Drivers capacity in an econtainer.This part has a power supply of 6/28V volts.There is a maximum input voltage of 6V volts.As a minimum input voltage, it requires -300mV volts.
AUIPS1031 Features
Supplied from 14V
Resistance of 40mOhm
AUIPS1031 Applications
There are a lot of Infineon Technologies AUIPS1031 Power Switches ICs applications.
- Portable Devices
- USB Power Distribution
- Smartphone and PDA
- Portable Music Players
- Solid State Drivers
- Hot-Swap Systems
- Wireless Headsets
- USB Ports/Hubs
- Portable/Handheld Devices
- USB3.1 Power Delivery
