banner_page

AUIPS1031R

6/28V N-Channel 2.29mm PMIC Automotive, AEC-Q100 Series AUIPS1031R 14V TO-252-3, DPak (2 Leads + Tab), SC-63


  • Manufacturer: Infineon Technologies
  • Nocochips NO: 376-AUIPS1031R
  • Package: TO-252-3, DPak (2 Leads + Tab), SC-63
  • Datasheet: PDF
  • Stock: 308
  • Description: 6/28V N-Channel 2.29mm PMIC Automotive, AEC-Q100 Series AUIPS1031R 14V TO-252-3, DPak (2 Leads + Tab), SC-63 (Kg)

Details

Tags

Parameters
JESD-609 Code e3
Part Status Obsolete
Moisture Sensitivity Level (MSL) 1 (Unlimited)
Number of Terminations 3
ECCN Code EAR99
Terminal Finish Matte Tin (Sn) - with Nickel (Ni) barrier
Subcategory Peripheral Drivers
Terminal Position SINGLE
Terminal Form GULL WING
Peak Reflow Temperature (Cel) 260
Number of Functions 1
Supply Voltage 14V
Terminal Pitch 2.29mm
Reach Compliance Code compliant
Time@Peak Reflow Temperature-Max (s) 30
Base Part Number AUIPS1031R
JESD-30 Code R-PSSO-G3
Number of Outputs 1
Qualification Status Not Qualified
Output Type N-Channel
Supply Voltage-Max (Vsup) 28V
Power Supplies 6/28V
Supply Voltage-Min (Vsup) 6V
Interface On/Off
Current - Output (Max) 3A
Output Configuration Low Side
Voltage - Supply (Vcc/Vdd) Not Required
Input Type Non-Inverting
Switch Type General Purpose
Ratio - Input:Output 1:1
Voltage - Load 36V Max
Driver Number of Bits 1
Fault Protection Current Limiting (Fixed), Over Temperature
Turn On Time 30 µs
Rds On (Typ) 40m Ω
Turn Off Time 200 µs
Built-in Protections TRANSIENT; OVER CURRENT; OVER VOLTAGE; THERMAL
Output Current Flow Direction SINK
Height Seated (Max) 2.39mm
Length 6.54mm
Width 6.095mm
RoHS Status RoHS Compliant
Mounting Type Surface Mount
Package / Case TO-252-3, DPak (2 Leads + Tab), SC-63
Surface Mount YES
Operating Temperature -40°C~150°C TJ
Packaging Tube
Published 2010
Series Automotive, AEC-Q100

AUIPS1031R Overview


It's?packaged?in?the way?of?a?Tube.Package TO-252-3, DPak (2 Leads + Tab), SC-63 contains it.In this case, the LED driving board is mounted as Surface Mount.It owns the General Purpose switch type.In order to guarantee reliable performance, the temperature should be set to -40°C~150°C TJ.By default, it is set to output 1.Operation is based on Not Required supply voltage.Voltage output is N-Channel volts at maximum.It is part of the AUIPS1031R family of LED drivers.A total of 3 terminations have been found in it.It has 1 functions.This LED driver has a maximum output of 3AV.Using a voltage of 14V allows for high efficiency.There is an electrical component included in the Automotive, AEC-Q100 series.A self-contained container with a capacity of Peripheral Drivers contains this lighting driver.The lighting driver is configured to have a maximum supply voltage of 28V (Vsup).Normal operation requires Vsup above 6V.A 6/28V power supply is used by the part.

AUIPS1031R Features


Supplied from 14V

AUIPS1031R Applications


There are a lot of Infineon Technologies AUIPS1031R Power Switches ICs applications.

  • Wireless/Networking Cards
  • Smart Phones, Feature Phones
  • Smartphone and PDA
  • Hot Swaps
  • Wireless Headsets
  • Notebook and Tablet Computers
  • Portable Music Players
  • Portable GPS
  • Portable Devices
  • Mobile Communication Devices

Write a review

Note: HTML is not translated!
    Bad           Good