AUIPS1031S
| Parameters | |
|---|---|
| Clamping Voltage | 39V |
| Nominal Input Voltage | 6V |
| Ratio - Input:Output | 1:1 |
| Voltage - Load | 36V Max |
| Driver Number of Bits | 1 |
| Fault Protection | Current Limiting (Fixed), Over Temperature |
| Rds On (Typ) | 40m Ω |
| Turn Off Time | 200 μs |
| Built-in Protections | TRANSIENT; OVER CURRENT; OVER VOLTAGE; THERMAL |
| Height | 2.39mm |
| Length | 6.73mm |
| Width | 6.22mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | RoHS Compliant |
| Lead Free | Lead Free |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | TO-263-3, D2Pak (2 Leads + Tab), TO-263AB |
| Number of Pins | 3 |
| Operating Temperature | -40°C~150°C TJ |
| Packaging | Tube |
| Published | 2010 |
| Series | Automotive, AEC-Q100 |
| JESD-609 Code | e3 |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 3 |
| ECCN Code | EAR99 |
| Resistance | 40mOhm |
| Terminal Finish | Matte Tin (Sn) - with Nickel (Ni) barrier |
| Subcategory | Peripheral Drivers |
| Max Power Dissipation | 3.1W |
| Terminal Position | SINGLE |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 14V |
| Terminal Pitch | 2.54mm |
| Current Rating | 18A |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | AUIPS1031S |
| Number of Outputs | 1 |
| Output Type | N-Channel |
| Max Output Current | 3.3A |
| Power Supplies | 6/28V |
| Voltage | 5.5V |
| Interface | On/Off |
| Current | 3.3A |
| Output Configuration | Low Side |
| Power Dissipation | 3.1W |
| Output Current | 3.3A |
| Voltage - Supply (Vcc/Vdd) | Not Required |
| Input Type | Non-Inverting |
| Switch Type | General Purpose |
AUIPS1031S Overview
As you can see, it's packaged in the way of a Tube.Package TO-263-3, D2Pak (2 Leads + Tab), TO-263AB contains it.Mounting type Surface Mount is selected for the LED driving board.General Purpose is the type of switch owned by it.It is recommended that the temperature be set to -40°C~150°C TJ for reliable operation.The LED driver has a total of 1 outputs.In order to operate, it requires a voltage supply of Not Required.A maximum output voltage of N-Channel volts can be achieved by this LED driver.It belongs to the AUIPS1031S family.It consists of 3 terminations in total.In order to operate, the 3 pins are used.It has 1 functions.This results in the maximum output current dropping to 3.3A to meet the operation criteria.As long as the supply voltage is 14V, high efficiency can be achieved.Surface Mount is mounted in the way of this LED driving board.It has a resistance of 40mOhm.A component of this type is included in the Automotive, AEC-Q100 series.As a result, the output current is set to 3.3A.Self-contained LED driver with Peripheral Drivers capacity in an econtainer.This part's power supply is 6/28V.
AUIPS1031S Features
Supplied from 14V
Resistance of 40mOhm
AUIPS1031S Applications
There are a lot of Infineon Technologies AUIPS1031S Power Switches ICs applications.
- Portable/Handheld Devices
- Various applications equipped with buttons
- Portable Music Players
- Hot Swap
- PDAs
- Set-Top Boxes
- USB Power Distribution
- Wearable Devices
- Telecom and Network Systems
- Notebook PC
