AUIPS1031STRL
| Parameters | |
|---|---|
| Mounting Type | Surface Mount |
| Package / Case | TO-263-3, D2Pak (2 Leads + Tab), TO-263AB |
| Number of Pins | 3 |
| Operating Temperature | -40°C~150°C TJ |
| Packaging | Tape & Reel (TR) |
| Published | 2010 |
| Series | Automotive, AEC-Q100 |
| JESD-609 Code | e3 |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 3 |
| ECCN Code | EAR99 |
| Terminal Finish | Matte Tin (Sn) - with Nickel (Ni) barrier |
| Subcategory | Peripheral Drivers |
| Max Power Dissipation | 3.1W |
| Terminal Position | SINGLE |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 14V |
| Terminal Pitch | 2.54mm |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | AUIPS1031S |
| Number of Outputs | 1 |
| Output Type | N-Channel |
| Max Output Current | 3.3A |
| Supply Voltage-Max (Vsup) | 28V |
| Power Supplies | 6/28V |
| Supply Voltage-Min (Vsup) | 6V |
| Interface | On/Off |
| Output Configuration | Low Side |
| Power Dissipation | 3.1W |
| Output Current | 3.3A |
| Voltage - Supply (Vcc/Vdd) | Not Required |
| Input Type | Non-Inverting |
| Switch Type | General Purpose |
| Ratio - Input:Output | 1:1 |
| Voltage - Load | 36V Max |
| Driver Number of Bits | 1 |
| Fault Protection | Current Limiting (Fixed), Over Temperature |
| Rds On (Typ) | 40m Ω |
| Turn Off Time | 200 μs |
| Built-in Protections | TRANSIENT; OVER CURRENT; OVER VOLTAGE; THERMAL |
| Width | 9.08mm |
| Radiation Hardening | No |
| RoHS Status | RoHS Compliant |
| Lead Free | Lead Free |
| Factory Lead Time | 1 Week |
| Mount | Surface Mount |
AUIPS1031STRL Overview
The LED driver's packaged as a Tape & Reel (TR).It is included in the package TO-263-3, D2Pak (2 Leads + Tab), TO-263AB.Surface Mount is the mounting type of the LED driver.A General Purpose switch type is owned by it.To ensure reliable operation, the temperature should be set to -40°C~150°C TJ.There is a default setting of 1 for output.A supply voltage of Not Required is required for it to operate.A maximum output voltage of N-Channel volts has been specified.It comes under the family of AUIPS1031S.A total of 3 terminations can be found in it.During operation, the 3 pins are used.As far as functions are concerned, the lighting driver has 1.The maximum output current drops to 3.3A in order to meet the operation criteria.High efficiency is possible at 14V supply voltage.It is positioned in the direction of Surface Mount.It belongs to the Automotive, AEC-Q100 series.When this case is used, the output current is set to 3.3A.A container with a capacity of Peripheral Drivers contains this self-contained lighting driver.The maximum supply voltage is set to 28V.The supply voltage (Vsup) should be kept above 6V for normal operation.6/28V is the power supply of the part.
AUIPS1031STRL Features
Supplied from 14V
AUIPS1031STRL Applications
There are a lot of Infineon Technologies AUIPS1031STRL Power Switches ICs applications.
- PC Card Hot Swap
- Set-top-box
- Portable/Handheld Devices
- USB3.1 Power Delivery
- HDD and SSD
- PC Cards
- Various applications equipped with buttons
- Hard Disk Drives
- Portable Music Players
- Hot Swap
