Parameters |
Factory Lead Time |
1 Week |
Mounting Type |
Surface Mount |
Package / Case |
TO-252-3, DPak (2 Leads + Tab), SC-63 |
Surface Mount |
YES |
Operating Temperature |
-40°C~150°C TJ |
Packaging |
Tube |
Published |
2011 |
Series |
Automotive, AEC-Q100 |
JESD-609 Code |
e3 |
Part Status |
Obsolete |
Moisture Sensitivity Level (MSL) |
1 (Unlimited) |
Number of Terminations |
3 |
ECCN Code |
EAR99 |
Terminal Finish |
Matte Tin (Sn) - with Nickel (Ni) barrier |
Subcategory |
Peripheral Drivers |
Terminal Position |
SINGLE |
Terminal Form |
GULL WING |
Peak Reflow Temperature (Cel) |
260 |
Number of Functions |
1 |
Supply Voltage |
14V |
Terminal Pitch |
2.29mm |
Reach Compliance Code |
compliant |
Time@Peak Reflow Temperature-Max (s) |
30 |
Base Part Number |
AUIPS1041R |
JESD-30 Code |
R-PSSO-G3 |
Number of Outputs |
1 |
Qualification Status |
Not Qualified |
Output Type |
N-Channel |
Supply Voltage-Max (Vsup) |
28V |
Power Supplies |
6/28V |
Supply Voltage-Min (Vsup) |
6V |
Interface |
On/Off |
Current - Output (Max) |
1.5A |
Output Configuration |
Low Side |
Voltage - Supply (Vcc/Vdd) |
Not Required |
Input Type |
Non-Inverting |
Switch Type |
General Purpose |
Ratio - Input:Output |
1:1 |
Voltage - Load |
6V~28V |
Driver Number of Bits |
1 |
Fault Protection |
Current Limiting (Fixed), Over Temperature |
Rds On (Typ) |
80m Ω |
Built-in Protections |
TRANSIENT; OVER CURRENT; OVER VOLTAGE; THERMAL |
Output Current Flow Direction |
SINK |
Height Seated (Max) |
2.39mm |
Length |
6.54mm |
Width |
6.095mm |
RoHS Status |
RoHS Compliant |
AUIPS1041R Overview
It is packaged in the form of a Tube.The TO-252-3, DPak (2 Leads + Tab), SC-63 package contains it.Mounting type Surface Mount is selected for the LED driving board.The switch type is General Purpose.It is recommended that the temperature be set to -40°C~150°C TJ for reliable operation.It is possible to use 1 outputs in the lighting driver.The LED driving board is powered by a voltage of Not Required.There is a maximum output voltage of N-Channel volts.The AUIPS1041R family contains this object.A total of 3 terminations have been found in it.It contains 1 functions.In terms of output, the lighting driver can provide a maximum of 1.5A V.As long as the supply voltage is 14V, high efficiency can be achieved.These electrical components are part of the Automotive, AEC-Q100 series.It is self-contained in an econtainer with a capacity of Peripheral Drivers.The Vsup value (maximum supply voltage) is set to 28V.Normal operation requires Vsup above 6V.In this case, the power supply is 6/28V.
AUIPS1041R Features
Supplied from 14V
AUIPS1041R Applications
There are a lot of Infineon Technologies AUIPS1041R Power Switches ICs applications.
- Hard Disk Drives
- HDD and SSD
- PDAs
- Hot Swap
- Smart Phones, Feature Phones
- USB Ports/Hubs
- USB Power Distribution
- Various applications equipped with buttons
- Mobile Communication Devices
- Storage Drives