AUIPS1041RTRL
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | TO-252-3, DPak (2 Leads + Tab), SC-63 |
| Number of Pins | 3 |
| Operating Temperature | -40°C~150°C TJ |
| Packaging | Tape & Reel (TR) |
| Published | 2006 |
| Series | Automotive, AEC-Q100 |
| JESD-609 Code | e3 |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 3 |
| ECCN Code | EAR99 |
| Resistance | 80mOhm |
| Terminal Finish | Matte Tin (Sn) - with Nickel (Ni) barrier |
| Subcategory | Peripheral Drivers |
| Terminal Position | SINGLE |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 14V |
| Terminal Pitch | 2.29mm |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | AUIPS1041R |
| Number of Outputs | 1 |
| Output Type | N-Channel |
| Max Output Current | 1.5A |
| Power Supplies | 6/28V |
| Voltage | 5.5V |
| Interface | On/Off |
| Current | 2.2A |
| Output Configuration | Low Side |
| Output Current | 2.2A |
| Voltage - Supply (Vcc/Vdd) | Not Required |
| Input Type | Non-Inverting |
| Switch Type | General Purpose |
| Rise Time | 7μs |
| Fall Time (Typ) | 10 μs |
| Nominal Input Voltage | 6V |
| Ratio - Input:Output | 1:1 |
| Voltage - Load | 6V~28V |
| Driver Number of Bits | 1 |
| Fault Protection | Current Limiting (Fixed), Over Temperature |
| Rds On (Typ) | 80m Ω |
| Built-in Protections | TRANSIENT; OVER CURRENT; OVER VOLTAGE; THERMAL |
| Height | 2.39mm |
| Length | 6.73mm |
| Width | 6.22mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
AUIPS1041RTRL Overview
As a result, it is packaged in the form of a Tape & Reel (TR).There is a TO-252-3, DPak (2 Leads + Tab), SC-63 package that includes it.The lighting driver is mounted in the Surface Mount position.There is a General Purpose switch type associated with it.To ensure reliable performance, the temperature should be set to -40°C~150°C TJ.The LED driver has a total of 1 outputs.A voltage of Not Required is used to power it.A maximum voltage of N-Channel volts is available from the output of this LED driver.There is a AUIPS1041R family of things that it belongs to.A total of 3 terminations can be found in it.In order to operate, the 3 pins are used.As far as functions are concerned, the lighting driver has 1.In order to meet the operation criteria, the maximum output current drops to 1.5A.With a supply voltage of 14V, high efficiency is possible.It is mounted in the way of Surface Mount.It has 80mOhm resistance.This electrical component is included in the Automotive, AEC-Q100 series.This case results in a 2.2A output current.A self-contained container with a capacity of Peripheral Drivers contains this lighting driver.A 6/28V power supply is used by the part.
AUIPS1041RTRL Features
Supplied from 14V
Resistance of 80mOhm
AUIPS1041RTRL Applications
There are a lot of Infineon Technologies AUIPS1041RTRL Power Switches ICs applications.
- Hot Swaps
- Wireless/Networking Cards
- Smartphone and PDA
- Telecom and Network Systems
- USB Protection
- Portable Music Players
- Smart Phones, Feature Phones
- Wireless Modem Data Cards
- Hard Disk Drives
- HDD, SSD
