AUIPS1042GTR
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 8-SOIC (0.154, 3.90mm Width) |
| Number of Pins | 8 |
| Operating Temperature | -40°C~150°C TJ |
| Packaging | Tape & Reel (TR) |
| Published | 2012 |
| Series | Automotive, AEC-Q100 |
| JESD-609 Code | e3 |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 2 (1 Year) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Resistance | 80mOhm |
| Terminal Finish | Matte Tin (Sn) |
| Subcategory | Peripheral Drivers |
| Max Power Dissipation | 1.25W |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Number of Functions | 1 |
| Supply Voltage | 14V |
| Current Rating | 4.5A |
| Base Part Number | AUIPS1042G |
| Number of Outputs | 2 |
| Output Type | N-Channel |
| Max Output Current | 1.5A |
| Voltage | 5.5V |
| Interface | On/Off |
| Current | 1.5A |
| Output Configuration | Low Side |
| Power Dissipation | 1.25W |
| Output Current | 1.5A |
| Voltage - Supply (Vcc/Vdd) | Not Required |
| Input Type | Non-Inverting |
| Turn On Delay Time | 15 μs |
| Switch Type | General Purpose |
| Clamping Voltage | 39V |
| Rise Time | 7μs |
| Fall Time (Typ) | 10 μs |
| Nominal Input Voltage | 6V |
| Turn-Off Delay Time | 150 μs |
| Ratio - Input:Output | 1:1 |
| Voltage - Load | 6V~28V |
| Driver Number of Bits | 2 |
| Fault Protection | Current Limiting (Fixed), Over Temperature |
| Rds On (Typ) | 80m Ω |
| Drain to Source Resistance | 80mOhm |
| Built-in Protections | TRANSIENT; OVER CURRENT; OVER VOLTAGE; THERMAL |
| Height | 1.5mm |
| Length | 5mm |
| Width | 4mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
AUIPS1042GTR Overview
The package is in the form of a Tape & Reel (TR).The 8-SOIC (0.154, 3.90mm Width) package contains it.The LED driver is mounted as Surface Mount.A General Purpose switch type is owned by it.It is recommended that the temperature be set to -40°C~150°C TJ for reliable operation.The LED driver has a total of 2 outputs.The LED driving board operates at Not Required volts.A maximum output voltage of N-Channel volts can be achieved by this LED driver.The AUIPS1042G family contains this object.In total, there are 8 terminations.For operation, we use the 8 pins.As far as functions are concerned, the lighting driver has 1.This results in the maximum output current dropping to 1.5A to meet the operation criteria.High efficiency is possible at 14V supply voltage.As a result, it is mounted in the manner of Surface Mount.In this case, there is 80mOhm resistance in the LED driving board.A component of this type is included in the Automotive, AEC-Q100 series.This case has the output current set to 1.5A.A self-contained LED driver with a capacity of Peripheral Drivers is contained in an econtainer.
AUIPS1042GTR Features
Supplied from 14V
Resistance of 80mOhm
AUIPS1042GTR Applications
There are a lot of Infineon Technologies AUIPS1042GTR Power Switches ICs applications.
- Wireless Headsets
- Wireless Modem Data Cards
- PDAs
- PC Cards
- Set-Top Boxes
- Smartphone and PDA
- PC Card Hot Swap
- Storage (HDDs, SSDs)
- Portable Devices
- Handheld Devices
