banner_page

AUIPS1051L

N-Channel PMIC Automotive, AEC-Q100 Series AUIPS1051L 3 Pin 14V TO-261-4, TO-261AA


  • Manufacturer: Infineon Technologies
  • Nocochips NO: 376-AUIPS1051L
  • Package: TO-261-4, TO-261AA
  • Datasheet: PDF
  • Stock: 782
  • Description: N-Channel PMIC Automotive, AEC-Q100 Series AUIPS1051L 3 Pin 14V TO-261-4, TO-261AA (Kg)

Details

Tags

Parameters
Mount Surface Mount
Mounting Type Surface Mount
Package / Case TO-261-4, TO-261AA
Number of Pins 3
Operating Temperature -40°C~150°C TJ
Packaging Tube
Published 2009
Series Automotive, AEC-Q100
JESD-609 Code e3
Part Status Obsolete
Moisture Sensitivity Level (MSL) 2 (1 Year)
Number of Terminations 3
ECCN Code EAR99
Resistance 250MOhm
Terminal Finish Matte Tin (Sn)
Max Power Dissipation 2W
Terminal Position DUAL
Terminal Form GULL WING
Peak Reflow Temperature (Cel) 260
Number of Functions 1
Supply Voltage 14V
Current Rating 1.3A
Time@Peak Reflow Temperature-Max (s) 30
Base Part Number AUIPS1051L
Number of Outputs 1
Output Type N-Channel
Max Output Current 1.3A
Voltage 5.5V
Interface On/Off
Current 1.4A
Output Configuration Low Side
Power Dissipation 2W
Output Current 1.4A
Voltage - Supply (Vcc/Vdd) Not Required
Input Type Non-Inverting
Turn On Delay Time 3 μs
Switch Type General Purpose
Clamping Voltage 39V
Rise Time 3μs
Fall Time (Typ) 4 μs
Turn-Off Delay Time 15 μs
Ratio - Input:Output 1:1
Voltage - Load 6V~28V
Fault Protection Current Limiting (Fixed), Over Temperature
Rds On (Typ) 160m Ω
Max Junction Temperature (Tj) 150°C
Turn Off Time 40 μs
Built-in Protections TRANSIENT; OVER CURRENT
Height 1.8mm
Length 6.7mm
Width 3.7mm
Radiation Hardening No
RoHS Status RoHS Compliant
Lead Free Lead Free

AUIPS1051L Overview


As a result, it is packaged in the form of a Tube.The TO-261-4, TO-261AA package contains it.Mounting type Surface Mount is selected for the LED driving board.The switch type is General Purpose.It is recommended that the temperature be set to -40°C~150°C TJ for reliable performance.The LED driver has 1 outputs.It uses a supply voltage of Not Required to operate.A maximum output voltage of N-Channel volts can be obtained with this LED driver.It belongs to the family AUIPS1051L.The termination count is 3.For operation, 3 pins are used.It has 1 functions.To meet the operation criteria, the maximum output current drops to 1.3A.Using a voltage of 14V allows for high efficiency.As a result, it is mounted in the manner of Surface Mount.Currently, the LED driving board has 250MOhm resistance.The Automotive, AEC-Q100 series includes this electrical component.In this case, the output current is set to 1.4A.

AUIPS1051L Features


Supplied from 14V
Resistance of 250MOhm

AUIPS1051L Applications


There are a lot of Infineon Technologies AUIPS1051L Power Switches ICs applications.

  • Wireless/Networking Cards
  • Hot Swap
  • Hot-Swap Systems
  • USB Protection
  • Wireless Headsets
  • Hard Disk Drives
  • HDD and SSD
  • Storage Drives
  • Wearable Devices
  • Hot Swap

Write a review

Note: HTML is not translated!
    Bad           Good