AUIPS1052GTR
| Parameters | |
|---|---|
| Subcategory | Peripheral Drivers |
| Max Power Dissipation | 1.25W |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Number of Functions | 1 |
| Supply Voltage | 14V |
| Current Rating | 1.3A |
| Base Part Number | AUIPS1052G |
| Number of Outputs | 2 |
| Output Voltage | 36V |
| Output Type | N-Channel |
| Max Output Current | 1.1A |
| Voltage | 5.5V |
| Interface | On/Off |
| Nominal Supply Current | 1mA |
| Current | 1.1A |
| Output Configuration | Low Side |
| Power Dissipation | 1.25W |
| Output Current | 500mA |
| Voltage - Supply (Vcc/Vdd) | Not Required |
| Input Type | Non-Inverting |
| Switch Type | General Purpose |
| Clamping Voltage | 39V |
| Rise Time | 10μs |
| Fall Time (Typ) | 10 μs |
| Nominal Input Voltage | 6V |
| Ratio - Input:Output | 1:1 |
| Voltage - Load | 36V Max |
| Driver Number of Bits | 2 |
| Fault Protection | Current Limiting (Fixed), Over Temperature |
| Rds On (Typ) | 160m Ω |
| Turn Off Time | 40 μs |
| Built-in Protections | TRANSIENT; OVER CURRENT |
| Height | 1.5mm |
| Length | 5mm |
| Width | 4mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
| Factory Lead Time | 1 Week |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 8-SOIC (0.154, 3.90mm Width) |
| Number of Pins | 8 |
| Operating Temperature | -40°C~150°C TJ |
| Packaging | Tape & Reel (TR) |
| Published | 2009 |
| Series | Automotive, AEC-Q100 |
| JESD-609 Code | e3 |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 2 (1 Year) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Resistance | 160mOhm |
| Terminal Finish | Matte Tin (Sn) |
AUIPS1052GTR Overview
Tape & Reel (TR) is the way it's packaged.It is included with the 8-SOIC (0.154, 3.90mm Width) package as well.The lighting driver is mounted in the Surface Mount position.General Purpose is the type of switch owned by it.In order to guarantee reliable performance, the temperature should be set to -40°C~150°C TJ.There is a default setting of 2 for output.A voltage of Not Required is used to power it.There is a maximum output voltage of N-Channel volts.The AUIPS1052G family contains this object.It has a total of 8 terminations.It is necessary to use the 8 pins in order to operate the LED driver.Currently, there are 1 functions associated with the lighting driver.The maximum output current is reduced to 1.1A to meet the operation criteria.With a supply voltage of 14V, high efficiency is possible.The lighting driver is mounted in the way of Surface Mount.In this LED driving board, there is 160mOhm resistance.It is part of the Automotive, AEC-Q100 series.As a result, the output current is set to 500mA.Self-contained in an econtainer with a capacity of Peripheral Drivers, this LED driver is self-contained.
AUIPS1052GTR Features
Supplied from 14V
Resistance of 160mOhm
AUIPS1052GTR Applications
There are a lot of Infineon Technologies AUIPS1052GTR Power Switches ICs applications.
- Set-Top Boxes
- Smartphone and PDA
- Wireless/Networking Cards
- Handheld Devices
- PC Cards
- PC Card Hot Swap
- Hard Disk Drives
- USB Ports/Hubs
- Gaming
- Smart Phones, Feature Phones
