banner_page

AUIPS2031R

6/50V N-Channel 2.29mm PMIC Automotive, AEC-Q100 Series AUIPS2031R 3 Pin 28V TO-252-3, DPak (2 Leads + Tab), SC-63


  • Manufacturer: Infineon Technologies
  • Nocochips NO: 376-AUIPS2031R
  • Package: TO-252-3, DPak (2 Leads + Tab), SC-63
  • Datasheet: PDF
  • Stock: 679
  • Description: 6/50V N-Channel 2.29mm PMIC Automotive, AEC-Q100 Series AUIPS2031R 3 Pin 28V TO-252-3, DPak (2 Leads + Tab), SC-63 (Kg)

Details

Tags

Parameters
Factory Lead Time 1 Week
Mount Surface Mount
Mounting Type Surface Mount
Package / Case TO-252-3, DPak (2 Leads + Tab), SC-63
Number of Pins 3
Operating Temperature -40°C~150°C TJ
Packaging Tube
Published 2009
Series Automotive, AEC-Q100
JESD-609 Code e3
Part Status Obsolete
Moisture Sensitivity Level (MSL) 1 (Unlimited)
Number of Terminations 2
ECCN Code EAR99
Resistance 45mOhm
Terminal Finish Matte Tin (Sn) - with Nickel (Ni) barrier
Subcategory Peripheral Drivers
Max Power Dissipation 2.5W
Terminal Position SINGLE
Terminal Form GULL WING
Peak Reflow Temperature (Cel) 260
Number of Functions 1
Supply Voltage 28V
Terminal Pitch 2.29mm
Time@Peak Reflow Temperature-Max (s) 30
Base Part Number AUIPS2031R
JESD-30 Code R-PSSO-G2
Number of Outputs 1
Output Type N-Channel
Max Output Current 2.3A
Power Supplies 6/50V
Voltage 5.5V
Interface On/Off
Current 2.3A
Output Configuration Low Side
Power Dissipation 2.5W
Output Current 2.3A
Voltage - Supply (Vcc/Vdd) Not Required
Input Type Non-Inverting
Switch Type General Purpose
Nominal Input Voltage 6V
Ratio - Input:Output 1:1
Voltage - Load 60V Max
Driver Number of Bits 1
Fault Protection Current Limiting (Fixed), Over Temperature
Turn On Time 5 μs
Rds On (Typ) 45m Ω
Built-in Protections TRANSIENT; OVER CURRENT; THERMAL
Height 2.39mm
Length 6.73mm
Width 6.22mm
Radiation Hardening No
REACH SVHC No SVHC
RoHS Status RoHS Compliant
Lead Free Lead Free

AUIPS2031R Overview


As a result, it is packaged in the form of a Tube.This file is included in package TO-252-3, DPak (2 Leads + Tab), SC-63.This lighting drivere has a mounting type of Surface Mount.It owns the General Purpose switch type.To ensure reliable operation, the temperature should be set to -40°C~150°C TJ.There is a default setting of 1 for output.The LED driving board is powered by a voltage of Not Required.Voltage output is N-Channel volts at maximum.It comes under the family of AUIPS2031R.In total, there are 2 terminations.The operation is performed through the 3 pins.It contains 1 functions.In order to meet the operation criteria, the maximum output current drops to 2.3A.A supply voltage of 28V leads to high efficiency.It is positioned in the direction of Surface Mount.Currently, the LED driving board has 45mOhm resistance.It belongs to the Automotive, AEC-Q100 series.In this case, the output current will be set to 2.3A.This LED driver is self-contained in an econtainer with a capacity of Peripheral Drivers.It has a power supply of 6/50V.

AUIPS2031R Features


Supplied from 28V
Resistance of 45mOhm

AUIPS2031R Applications


There are a lot of Infineon Technologies AUIPS2031R Power Switches ICs applications.

  • Wireless Modem Data Cards
  • Solid-State Drives
  • Hot Swaps
  • Solid State Drivers
  • Storage Drives
  • PDAs
  • Various applications equipped with buttons
  • Notebook PC
  • USB Power Distribution
  • Portable/Handheld Devices

Write a review

Note: HTML is not translated!
    Bad           Good