AUIPS2041R
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | TO-252-3, DPak (2 Leads + Tab), SC-63 |
| Number of Pins | 3 |
| Operating Temperature | -40°C~150°C TJ |
| Packaging | Tube |
| Published | 2012 |
| Series | Automotive, AEC-Q100 |
| JESD-609 Code | e3 |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 2 |
| ECCN Code | EAR99 |
| Resistance | 100mOhm |
| Terminal Finish | Matte Tin (Sn) - with Nickel (Ni) barrier |
| Subcategory | Peripheral Drivers |
| Power Rating | 1W |
| Max Power Dissipation | 1W |
| Terminal Position | SINGLE |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 14V |
| Terminal Pitch | 2.29mm |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | AUIPS2041R |
| JESD-30 Code | R-PSSO-G2 |
| Number of Outputs | 1 |
| Output Type | N-Channel |
| Max Output Current | 1.4A |
| Supply Voltage-Max (Vsup) | 50V |
| Supply Voltage-Min (Vsup) | 6V |
| Interface | On/Off |
| Current | 1.4A |
| Output Configuration | Low Side |
| Power Dissipation | 1W |
| Output Current | 1.4A |
| Voltage - Supply (Vcc/Vdd) | Not Required |
| Input Type | Non-Inverting |
| Switch Type | General Purpose |
| Output Current per Channel | 1.4A |
| Nominal Input Voltage | 5.5V |
| Ratio - Input:Output | 1:1 |
| Voltage - Load | 60V Max |
| Driver Number of Bits | 1 |
| Fault Protection | Current Limiting (Fixed), Over Temperature |
| Turn On Time | 4 μs |
| Rds On (Typ) | 100m Ω |
| Turn Off Time | 8 μs |
| Built-in Protections | TRANSIENT; OVER CURRENT; THERMAL |
| Height | 2.39mm |
| Length | 6.73mm |
| Width | 7.49mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | RoHS Compliant |
| Lead Free | Lead Free |
AUIPS2041R Overview
It's?packaged?in?the way?of?a?Tube.In the TO-252-3, DPak (2 Leads + Tab), SC-63 package, it is included.This lighting drivere has a mounting type of Surface Mount.General Purpose is the switch type it owns.Keeping the temperature at -40°C~150°C TJ ensures reliable operation.There are 1 outputs available on this lighting driver.A voltage of Not Required is used to power it.The maximum output voltage of this LED driver is N-Channel volts.It belongs to the AUIPS2041R family.There are 2 terminations in it.It is necessary to use the 3 pins in order to operate the LED driver.Currently, there are 1 functions associated with the lighting driver.The maximum output current drops to 1.4A in order to meet the operation criteria.A supply voltage of 14V leads to high efficiency.In this case, it is mounted in the way of Surface Mount.It has 100mOhm resistance.There is an electrical component included in the Automotive, AEC-Q100 series.In this case, the output current is set to 1.4A.The LED driver is packaged in an econtainer with a capacity of Peripheral Drivers.In this case, Vsup (maximum supply voltage) is set to 50V.Normal operation requires a voltage above 6V for the supply voltage.
AUIPS2041R Features
Supplied from 14V
Resistance of 100mOhm
AUIPS2041R Applications
There are a lot of Infineon Technologies AUIPS2041R Power Switches ICs applications.
- Wireless Modem Data Cards
- Portable Music Players
- Wearable Devices
- Smart Phones, Feature Phones
- Portable Video Game Players
- Solid-State Drives
- Mobile Communication Devices
- Hot Swap
- USB Power Distribution
- Wireless Headsets
