AUIPS2041RTRL
| Parameters | |
|---|---|
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 14V |
| Terminal Pitch | 2.29mm |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | AUIPS2041R |
| JESD-30 Code | R-PSSO-G2 |
| Number of Outputs | 1 |
| Output Type | N-Channel |
| Max Output Current | 1.4A |
| Supply Voltage-Max (Vsup) | 50V |
| Supply Voltage-Min (Vsup) | 6V |
| Interface | On/Off |
| Output Configuration | Low Side |
| Power Dissipation | 1W |
| Output Current | 1.4A |
| Voltage - Supply (Vcc/Vdd) | Not Required |
| Input Type | Non-Inverting |
| Switch Type | General Purpose |
| Output Current per Channel | 1.4A |
| Nominal Input Voltage | 5.5V |
| Ratio - Input:Output | 1:1 |
| Voltage - Load | 60V Max |
| Driver Number of Bits | 1 |
| Fault Protection | Current Limiting (Fixed), Over Temperature |
| Turn On Time | 4 μs |
| Rds On (Typ) | 100m Ω |
| Turn Off Time | 8 μs |
| Built-in Protections | TRANSIENT; OVER CURRENT; THERMAL |
| Length | 6.54mm |
| Width | 6.095mm |
| Radiation Hardening | No |
| RoHS Status | RoHS Compliant |
| Lead Free | Lead Free |
| Factory Lead Time | 1 Week |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | TO-252-3, DPak (2 Leads + Tab), SC-63 |
| Number of Pins | 3 |
| Operating Temperature | -40°C~150°C TJ |
| Packaging | Tape & Reel (TR) |
| Published | 2011 |
| Series | Automotive, AEC-Q100 |
| JESD-609 Code | e3 |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 2 |
| ECCN Code | EAR99 |
| Resistance | 100mOhm |
| Terminal Finish | Matte Tin (Sn) - with Nickel (Ni) barrier |
| Subcategory | Peripheral Drivers |
| Max Power Dissipation | 1W |
| Terminal Position | SINGLE |
AUIPS2041RTRL Overview
It is packaged in the manner of a Tape & Reel (TR).There is a package for it in the TO-252-3, DPak (2 Leads + Tab), SC-63 package.In this case, the LED driving board is mounted as Surface Mount.The switch type of this switch is General Purpose.To ensure reliable performance, the temperature should be set to -40°C~150°C TJ.There are 1 outputs available on this lighting driver.With a supply voltage of Not Required, the LED driving board operates.The maximum output voltage of this LED driver is N-Channel volts.It belongs to the AUIPS2041R family.The termination count is 2.The operation is carried out using the 3 pins.There are 1 functions of the LED driver.As a result, the maximum output current is reduced to 1.4A in order to meet the operation requirements.It is possible to obtain high efficiency with a supply voltage of 14V.In this case, it is mounted in the way of Surface Mount.100mOhm is the resistance of the lighting driver.These electrical components are part of the Automotive, AEC-Q100 series.It is set to 1.4A in this case.A self-contained container with a capacity of Peripheral Drivers contains this lighting driver.Vsup (maximum supply voltage) is set to 50V.In order for this lighting driver to operate normally, the supply voltage (Vsup) should remain above 6V.
AUIPS2041RTRL Features
Supplied from 14V
Resistance of 100mOhm
AUIPS2041RTRL Applications
There are a lot of Infineon Technologies AUIPS2041RTRL Power Switches ICs applications.
- Mobile Communication Devices
- Notebook and Tablet Computers
- Hot-Swap Systems
- HDD and SSD
- Solid-State Drives
- Hot Swap
- Hot Swaps
- Hot Swap
- PDAs
- Portable Devices
