banner_page

AUIPS2051LTR

28V N-Channel PMIC Automotive, AEC-Q100 Series AUIPS2051L 3 Pin 5V TO-261-4, TO-261AA


  • Manufacturer: Infineon Technologies
  • Nocochips NO: 376-AUIPS2051LTR
  • Package: TO-261-4, TO-261AA
  • Datasheet: PDF
  • Stock: 164
  • Description: 28V N-Channel PMIC Automotive, AEC-Q100 Series AUIPS2051L 3 Pin 5V TO-261-4, TO-261AA (Kg)

Details

Tags

Parameters
Lead Free Lead Free
Factory Lead Time 1 Week
Mount Surface Mount
Mounting Type Surface Mount
Package / Case TO-261-4, TO-261AA
Number of Pins 3
Operating Temperature -40°C~150°C TJ
Packaging Tape & Reel (TR)
Published 2009
Series Automotive, AEC-Q100
Part Status Not For New Designs
Moisture Sensitivity Level (MSL) 2 (1 Year)
Number of Terminations 3
ECCN Code EAR99
Resistance 250mOhm
Subcategory Peripheral Drivers
Power Rating 2W
Max Power Dissipation 2W
Terminal Position DUAL
Terminal Form GULL WING
Number of Functions 1
Supply Voltage 5V
Current Rating 1.8A
Base Part Number AUIPS2051L
Number of Outputs 1
Output Type N-Channel
Max Output Current 900mA
Operating Supply Voltage 60V
Power Supplies 28V
Voltage 5.5V
Interface On/Off
Current 900mA
Output Configuration Low Side
Power Dissipation 2W
Output Current 900mA
Voltage - Supply (Vcc/Vdd) Not Required
Input Type Non-Inverting
Switch Type General Purpose
Clamping Voltage 70V
Max Input Voltage 5.5V
Output Current per Channel 900mA
Nominal Input Voltage 5.5V
Ratio - Input:Output 1:1
Voltage - Load 60V Max
Driver Number of Bits 1
Fault Protection Current Limiting (Fixed), Over Temperature
Input Bias Current 80μA
Rds On (Typ) 250m Ω
Built-in Protections TRANSIENT; OVER CURRENT
Height 1.6mm
Length 6.6802mm
Width 3.7mm
Radiation Hardening No
REACH SVHC No SVHC
RoHS Status ROHS3 Compliant

AUIPS2051LTR Overview


As a result, it is packaged in the form of a Tape & Reel (TR).There is a TO-261-4, TO-261AA package that includes it.Surface Mount is the mounting type of the LED driver.The switch type is General Purpose.Keeping the temperature at -40°C~150°C TJ ensures reliable operation.The lighting driver has a total of 1 outputs that are available for use.To operate, it needs a supply voltage of Not Required.A maximum output voltage of N-Channel volts can be achieved by this LED driver.It is a member of the AUIPS2051L family.A total of 3 terminations have been found in it.The 3 pins are used for the operation of the system.Currently, there are 1 functions associated with the lighting driver.The maximum output current is reduced to 900mA to meet the operation criteria.It is possible to achieve a high level of efficiency with a supply voltage of 5V.Surface Mount is mounted in the way of this LED driving board.Currently, the LED driving board has a resistance of 250mOhm ohms.This electrical component is part of the Automotive, AEC-Q100 series.It is set to 900mA in this case.A self-contained econtainer holding Peripheral Drivers capacity contains this lighting driver.This part is powered by 28V.For maximum efficiency, the supply voltage should be set to 60V.The maximum input voltage of the LED driver is 5.5V volts.

AUIPS2051LTR Features


Supplied from 5V
Resistance of 250mOhm

AUIPS2051LTR Applications


There are a lot of Infineon Technologies AUIPS2051LTR Power Switches ICs applications.

  • Set-top-box
  • USB Power Distribution
  • Set-Top Boxes
  • Storage (HDDs, SSDs)
  • Mobile Communication Devices
  • PC Cards
  • Handheld Devices
  • Storage Drives
  • USB Ports/Hubs
  • Notebook and Tablet Computers

Write a review

Note: HTML is not translated!
    Bad           Good