AUIPS2052GTR
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 8-SOIC (0.154, 3.90mm Width) |
| Number of Pins | 8 |
| Operating Temperature | -40°C~150°C TJ |
| Packaging | Tape & Reel (TR) |
| Published | 2012 |
| Series | Automotive, AEC-Q100 |
| Part Status | Not For New Designs |
| Moisture Sensitivity Level (MSL) | 2 (1 Year) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Resistance | 250mOhm |
| Subcategory | Peripheral Drivers |
| Power Rating | 1.25W |
| Max Power Dissipation | 1.25W |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Current Rating | 1.8A |
| Base Part Number | AUIPS2052G |
| Number of Outputs | 2 |
| Output Voltage | 35V |
| Output Type | N-Channel |
| Max Output Current | 900mA |
| Operating Supply Voltage | 60V |
| Number of Channels | 1 |
| Voltage | 5.5V |
| Interface | On/Off |
| Current | 900mA |
| Output Configuration | Low Side |
| Power Dissipation | 2W |
| Output Current | 900mA |
| Voltage - Supply (Vcc/Vdd) | Not Required |
| Input Type | Non-Inverting |
| Turn On Delay Time | 1 μs |
| Switch Type | General Purpose |
| Clamping Voltage | 70V |
| Max Input Voltage | 5.5V |
| Output Current per Channel | 900mA |
| Rise Time | 300ns |
| Fall Time (Typ) | 500 ns |
| Nominal Input Voltage | 5.5V |
| Turn-Off Delay Time | 1.8 μs |
| Ratio - Input:Output | 1:1 |
| Voltage - Load | 60V Max |
| Driver Number of Bits | 2 |
| Fault Protection | Current Limiting (Fixed), Over Temperature |
| Input Bias Current | 80μA |
| Turn On Time | 3 μs |
| Rds On (Typ) | 250m Ω |
| Max Junction Temperature (Tj) | 150°C |
| Turn Off Time | 3.5 μs |
| Built-in Protections | TRANSIENT; OVER CURRENT |
| Height | 1.75mm |
| Length | 4.9784mm |
| Width | 3.9878mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
AUIPS2052GTR Overview
It is packaged in the manner of a Tape & Reel (TR).The 8-SOIC (0.154, 3.90mm Width) package contains it.Surface Mount is the mounting type of the LED driver.This switch is of type General Purpose.The temperature should be set to -40°C~150°C TJ to ensure reliable functioning.The LED driver is equipped with 2 outputs.It uses a supply voltage of Not Required to operate.A maximum output voltage of N-Channel volts can be obtained with this LED driver.I believe it belongs to the AUIPS2052G family.As a result, there are 8 terminations.It is necessary to use the 8 pins in order to operate the LED driver.It has 1 functions.The maximum output current must drop to 900mA to meet the operation criteria.As long as the supply voltage is 5V, high efficiency can be achieved.In this case, it is mounted in the way of Surface Mount.250mOhm resistance is present in the lighting driver.Electrical components such as this are included in the Automotive, AEC-Q100 series.This case results in a 900mA output current.This LED driver is self-contained in an econtainer with a capacity of Peripheral Drivers.There are a total of 1 available channels.It is recommended to set the supply voltage to 60V for optimum efficiency.This LED driving board can accept voltages up to 5.5V volts as an input.
AUIPS2052GTR Features
Supplied from 5V
Resistance of 250mOhm
1 channels
AUIPS2052GTR Applications
There are a lot of Infineon Technologies AUIPS2052GTR Power Switches ICs applications.
- Portable GPS
- USB Power Distribution
- USB Ports/Hubs
- Solid-State Drives
- Telecom and Network Systems
- Portable GPS Device
- Hot-Swap Systems
- Storage Drives
- Notebook PC
- Portable Video Game Players
