Parameters |
Factory Lead Time |
1 Week |
Mount |
Surface Mount |
Mounting Type |
Surface Mount |
Package / Case |
TO-252-5, DPak (4 Leads + Tab), TO-252AD |
Number of Pins |
5 |
Operating Temperature |
-40°C~150°C TJ |
Packaging |
Tube |
Published |
2012 |
Series |
Automotive, AEC-Q100 |
Feature |
Auto Restart |
Part Status |
Obsolete |
Moisture Sensitivity Level (MSL) |
1 (Unlimited) |
Number of Terminations |
5 |
ECCN Code |
EAR99 |
Resistance |
11mOhm |
Subcategory |
Peripheral Drivers |
Power Rating |
2.5W |
Max Power Dissipation |
2.5W |
Terminal Position |
SINGLE |
Current Rating |
60A |
Base Part Number |
AUIPS6011R |
Number of Outputs |
1 |
Output Type |
N-Channel |
Max Output Current |
5.6A |
Power Supplies |
6/28V |
Voltage |
36.3V |
Interface |
On/Off |
Nominal Supply Current |
2.2mA |
Current |
60A |
Output Configuration |
High Side |
Power Dissipation |
2.5W |
Output Current |
5.6A |
Voltage - Supply (Vcc/Vdd) |
Not Required |
Input Type |
Non-Inverting |
Turn On Delay Time |
80 ns |
Switch Type |
General Purpose |
Min Input Voltage |
-300mV |
Clamping Voltage |
39V |
Max Input Voltage |
5.5V |
Rise Time |
25ns |
Fall Time (Typ) |
30 ns |
Nominal Input Voltage |
5.5V |
Turn-Off Delay Time |
150 ns |
Ratio - Input:Output |
1:1 |
Voltage - Load |
36V Max |
Driver Number of Bits |
1 |
Fault Protection |
Current Limiting (Fixed), Open Load Detect, Over Temperature |
Rds On (Typ) |
11m Ω |
Height |
2.39mm |
Length |
6.73mm |
Width |
7.49mm |
Radiation Hardening |
No |
REACH SVHC |
No SVHC |
RoHS Status |
RoHS Compliant |
Lead Free |
Lead Free |
AUIPS6011R Overview
It's?packaged?in?the way?of?a?Tube.There is a package for it in the TO-252-5, DPak (4 Leads + Tab), TO-252AD package.The lighting driver has the mounting type Surface Mount.This switch is of type General Purpose.Ensure reliable operation by setting the temperature to -40°C~150°C TJ.By default, it is set to output 1.Operation is based on a supply voltage of Not Required.There is a maximum output voltage of N-Channel volts.A lighting driver with Auto Restart features is available.The AUIPS6011R family contains this object.As a result, there are 5 terminations.In order to operate, the 5 pins are used.This results in the maximum output current dropping to 5.6A to meet the operation criteria.In this case, it is mounted in the way of Surface Mount.The LED driver has 11mOhm resistance.It is included in the Automotive, AEC-Q100 series.As a result, the output current is set to 5.6A.The LED driver is packaged in an econtainer with a capacity of Peripheral Drivers.This part has a power supply of 6/28V.The maximum input voltage is 5.5V volts.It has a -300mV volt minimum input voltage.
AUIPS6011R Features
Resistance of 11mOhm
AUIPS6011R Applications
There are a lot of Infineon Technologies AUIPS6011R Power Switches ICs applications.
- Smart Phones, Feature Phones
- HDD and SSD
- Notebook and Tablet Computers
- Smartphone and PDA
- Hot-Swap Systems
- Portable Music Players
- Hot Swaps
- Mobile Communication Devices
- USB Ports/Hubs
- Portable/Handheld Devices