AUIPS6011S
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | TO-263-5, D2Pak (4 Leads + Tab), TO-263BB |
| Number of Pins | 5 |
| Operating Temperature | -40°C~150°C TJ |
| Packaging | Tube |
| Published | 2012 |
| Series | Automotive, AEC-Q100 |
| Feature | Auto Restart |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 5 |
| ECCN Code | EAR99 |
| Subcategory | Peripheral Drivers |
| Power Rating | 3.1W |
| Max Power Dissipation | 3.1W |
| Terminal Position | SINGLE |
| Base Part Number | AUIPS6011S |
| Number of Outputs | 1 |
| Output Type | N-Channel |
| Max Output Current | 6.3A |
| Power Supplies | 6/28V |
| Voltage | 36.3V |
| Interface | On/Off |
| Nominal Supply Current | 2.2mA |
| Current | 60A |
| Output Configuration | High Side |
| Power Dissipation | 3.1W |
| Output Current | 6.3A |
| Voltage - Supply (Vcc/Vdd) | Not Required |
| Input Type | Non-Inverting |
| Switch Type | General Purpose |
| Min Input Voltage | -300mV |
| Max Input Voltage | 5.5V |
| Rise Time | 80ns |
| Fall Time (Typ) | 80 ns |
| Nominal Input Voltage | 5.5V |
| Ratio - Input:Output | 1:1 |
| Voltage - Load | 36V Max |
| Driver Number of Bits | 1 |
| Fault Protection | Current Limiting (Fixed), Open Load Detect, Over Temperature |
| Rds On (Typ) | 11m Ω |
| Height | 4.83mm |
| Length | 10.67mm |
| Width | 11.33mm |
| Radiation Hardening | No |
| RoHS Status | RoHS Compliant |
AUIPS6011S Overview
It is packaged in the form of a Tube.The TO-263-5, D2Pak (4 Leads + Tab), TO-263BB package includes it.In this case, the LED driving board is mounted as Surface Mount.General Purpose is the switch type it owns.It is best to set the temperature to -40°C~150°C TJ to ensure reliable operation.The lighting driver is equipped with 1 outputs that can be used.Operation is based on a supply voltage of Not Required.The maximum output voltage of this LED driver is N-Channel volts.The lighting driver has Auto Restart features.It is part of the AUIPS6011S family of LED drivers.A total of 5 terminations have been recorded.In order to operate, 5 pins are used.To comply with the operation criteria, the maximum output current is reduced to 6.3A.Surface Mount is mounted in the way of this LED driving board.It is included in the Automotive, AEC-Q100 series.In this case, the output current will be set to 6.3A.Self-contained LED driver with Peripheral Drivers capacity in an econtainer.6/28V is the power supply of the part.A maximum input voltage of 5.5V volts can be applied to it.It requires -300mV volts as the minimum input voltage.
AUIPS6011S Features
AUIPS6011S Applications
There are a lot of Infineon Technologies AUIPS6011S Power Switches ICs applications.
- Solid State Drivers
- Hot Swap
- Wearable Devices
- Gaming
- HDD, SSD
- PDAs
- Handheld Devices
- Smartphone and PDA
- USB Ports/Hubs
- Telecom and Network Systems
