AUIPS6011STRL
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | TO-263-5, D2Pak (4 Leads + Tab), TO-263BB |
| Number of Pins | 5 |
| Operating Temperature | -40°C~150°C TJ |
| Packaging | Tape & Reel (TR) |
| Published | 2012 |
| Series | Automotive, AEC-Q100 |
| Feature | Auto Restart |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 5 |
| ECCN Code | EAR99 |
| Resistance | 11mOhm |
| Subcategory | Peripheral Drivers |
| Max Power Dissipation | 3.1W |
| Terminal Position | SINGLE |
| Base Part Number | AUIPS6011S |
| Number of Outputs | 1 |
| Output Type | N-Channel |
| Max Output Current | 6.3A |
| Power Supplies | 6/28V |
| Interface | On/Off |
| Nominal Supply Current | 2.2mA |
| Output Configuration | High Side |
| Power Dissipation | 3.1W |
| Output Current | 6.3A |
| Voltage - Supply (Vcc/Vdd) | Not Required |
| Input Type | Non-Inverting |
| Switch Type | General Purpose |
| Rise Time | 80ns |
| Fall Time (Typ) | 80 ns |
| Nominal Input Voltage | 5.5V |
| Ratio - Input:Output | 1:1 |
| Voltage - Load | 36V Max |
| Driver Number of Bits | 1 |
| Fault Protection | Current Limiting (Fixed), Open Load Detect, Over Temperature |
| Rds On (Typ) | 11m Ω |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | RoHS Compliant |
AUIPS6011STRL Overview
It's?packaged?in?the way?of?a?Tape & Reel (TR).There is a TO-263-5, D2Pak (4 Leads + Tab), TO-263BB package that includes it.The lighting driver has the mounting type Surface Mount.There is a General Purpose switch type associated with it.To ensure reliable operation, the temperature should be set to -40°C~150°C TJ.In this LED driver, there are no outputs available.The LED driving board is powered by a voltage of Not Required.A maximum output voltage of N-Channel volts can be achieved by this LED driver.As far as features are concerned, the LED driving board has Auto Restart.It belongs to the AUIPS6011S family.A total of 5 terminations can be found in it.The operation is performed through the 5 pins.The maximum output current is reduced to 6.3A to meet the operation criteria.The lighting driver is mounted in the way of Surface Mount.It has a resistance of 11mOhm.This electrical component is part of the Automotive, AEC-Q100 series.This case has the output current set to 6.3A.Self-contained LED driver with Peripheral Drivers capacity in an econtainer.This part has a power supply of 6/28V.
AUIPS6011STRL Features
Resistance of 11mOhm
AUIPS6011STRL Applications
There are a lot of Infineon Technologies AUIPS6011STRL Power Switches ICs applications.
- USB Power Distribution
- Hard Disk Drives
- Notebook PC
- Notebook and Tablet Computers
- Wireless Headsets
- Portable GPS Device
- Telecom and Network Systems
- Hot Swap
- Storage Drives
- USB3.1 Power Delivery
