AUIPS6021RTRL
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | TO-252-5, DPak (4 Leads + Tab), TO-252AD |
| Number of Pins | 5 |
| Operating Temperature | -40°C~150°C TJ |
| Packaging | Tape & Reel (TR) |
| Published | 2013 |
| Series | Automotive, AEC-Q100 |
| Feature | Auto Restart |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 5 |
| ECCN Code | EAR99 |
| Resistance | 24mOhm |
| Subcategory | Peripheral Drivers |
| Max Power Dissipation | 2.5W |
| Terminal Position | SINGLE |
| Base Part Number | AUIPS6021R |
| Number of Outputs | 1 |
| Output Type | N-Channel |
| Max Output Current | 3.9A |
| Power Supplies | 6/28V |
| Interface | On/Off |
| Nominal Supply Current | 2.2mA |
| Output Configuration | High Side |
| Power Dissipation | 2.5W |
| Output Current | 19A |
| Voltage - Supply (Vcc/Vdd) | Not Required |
| Input Type | Non-Inverting |
| Switch Type | General Purpose |
| Rise Time | 35μs |
| Fall Time (Typ) | 65 μs |
| Nominal Input Voltage | 5.5V |
| Ratio - Input:Output | 1:1 |
| Voltage - Load | 36V Max |
| Driver Number of Bits | 1 |
| Fault Protection | Current Limiting (Fixed), Open Load Detect, Over Temperature |
| Rds On (Typ) | 24m Ω |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | RoHS Compliant |
| Lead Free | Lead Free |
AUIPS6021RTRL Overview
As you can see, it's packaged in the way of a Tape & Reel (TR).It is included with the TO-252-5, DPak (4 Leads + Tab), TO-252AD package as well.It has been mounted as Surface Mount on the LED driver.There is a switch type of General Purpose.Ensure reliable operation by setting the temperature to -40°C~150°C TJ.In this LED driver, there are no outputs available.Operation is based on Not Required supply voltage.A maximum output voltage of N-Channel volts can be obtained with this LED driver.A lighting driver with Auto Restart features is available.It comes under the family of AUIPS6021R.As a result, there are 5 terminations.It is necessary to use the 5 pins in order to operate the LED driver.This results in the maximum output current dropping to 3.9A to meet the operation criteria.Surface Mount is mounted in the way of this LED driving board.Currently, the LED driving board has 24mOhm resistance.It belongs to the Automotive, AEC-Q100 series.The output current is set to 19A in this case.This LED driver is self-contained in an econtainer with a capacity of Peripheral Drivers.In this case, the power supply is 6/28V.
AUIPS6021RTRL Features
Resistance of 24mOhm
AUIPS6021RTRL Applications
There are a lot of Infineon Technologies AUIPS6021RTRL Power Switches ICs applications.
- PC Cards
- PDAs
- USB Power Distribution
- Portable Music Players
- Hot Swaps
- Handheld Devices
- Set-Top Boxes
- Hot Swap
- USB Ports/Hubs
- Low Voltage I/O System Power
