AUIPS6021S
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | TO-263-5, D2Pak (4 Leads + Tab), TO-263BB |
| Number of Pins | 5 |
| Operating Temperature | -40°C~150°C TJ |
| Packaging | Tube |
| Published | 2013 |
| Series | Automotive, AEC-Q100 |
| Feature | Auto Restart |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 4 |
| ECCN Code | EAR99 |
| Resistance | 24mOhm |
| Subcategory | Peripheral Drivers |
| Power Rating | 3.1W |
| Max Power Dissipation | 3.1W |
| Terminal Position | SINGLE |
| Terminal Form | GULL WING |
| Number of Functions | 1 |
| Supply Voltage | 14V |
| Base Part Number | AUIPS6021S |
| JESD-30 Code | R-PSSO-G4 |
| Number of Outputs | 1 |
| Output Type | N-Channel |
| Max Output Current | 4.3A |
| Power Supplies | 6/28V |
| Voltage | 36.3V |
| Interface | On/Off |
| Nominal Supply Current | 2.2mA |
| Current | 32A |
| Output Configuration | High Side |
| Power Dissipation | 3.1W |
| Output Current | 19A |
| Voltage - Supply (Vcc/Vdd) | Not Required |
| Input Type | Non-Inverting |
| Switch Type | General Purpose |
| Rise Time | 35μs |
| Fall Time (Typ) | 65 μs |
| Nominal Input Voltage | 5.5V |
| Ratio - Input:Output | 1:1 |
| Voltage - Load | 36V Max |
| Driver Number of Bits | 1 |
| Fault Protection | Current Limiting (Fixed), Open Load Detect, Over Temperature |
| Turn On Time | 40 μs |
| Rds On (Typ) | 24m Ω |
| Turn Off Time | 80 μs |
| Built-in Protections | OVER CURRENT; THERMAL; TRANSIENT |
| Height | 4.83mm |
| Length | 10.67mm |
| Width | 11.33mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | RoHS Compliant |
| Lead Free | Lead Free |
AUIPS6021S Overview
It is packaged in the manner of a Tube.There is a package for it in the TO-263-5, D2Pak (4 Leads + Tab), TO-263BB package.A Surface Mount mounting is used for the LED driving board.It owns the General Purpose switch type.To ensure reliable operation, set the temperature to -40°C~150°C TJ.The LED driver has a total of 1 outputs.In order to operate, it requires a voltage supply of Not Required.It produces a maximum output voltage of N-Channel volts at its maximum output.It has a total of Auto Restart features.The AUIPS6021S family contains this object.In total, there are 4 terminations.It is necessary to use the 5 pins in order to operate the LED driver.It has 1 functions.As a result, the maximum output current is reduced to 4.3A in order to meet the operation requirements.The supply voltage of 14V is conducive to high efficiency.This lighting driver is mounted in the way of Surface Mount.Lighting drivers with 24mOhm resistance are used.This electrical component can be found in the Automotive, AEC-Q100 series.In this case, the output current is set to 19A.There is a Peripheral Drivers capacity container for this LED driver that is self-contained.A 6/28V power supply is used by the part.
AUIPS6021S Features
Supplied from 14V
Resistance of 24mOhm
AUIPS6021S Applications
There are a lot of Infineon Technologies AUIPS6021S Power Switches ICs applications.
- Set-Top Boxes
- PC Cards
- Wireless/Networking Cards
- PC Card Hot Swap
- USB Power Distribution
- Hot Swap
- Hot Swap
- Portable GPS
- Wireless Headsets
- Hot-Swap Systems
