Parameters |
Factory Lead Time |
1 Week |
Mount |
Surface Mount |
Mounting Type |
Surface Mount |
Package / Case |
TO-263-5, D2Pak (4 Leads + Tab), TO-263BB |
Number of Pins |
5 |
Operating Temperature |
-40°C~150°C TJ |
Packaging |
Tape & Reel (TR) |
Published |
2013 |
Series |
Automotive, AEC-Q100 |
Feature |
Auto Restart |
Part Status |
Obsolete |
Moisture Sensitivity Level (MSL) |
1 (Unlimited) |
Number of Terminations |
4 |
ECCN Code |
EAR99 |
Subcategory |
Peripheral Drivers |
Max Power Dissipation |
3.1W |
Terminal Position |
SINGLE |
Terminal Form |
GULL WING |
Number of Functions |
1 |
Supply Voltage |
14V |
Base Part Number |
AUIPS6021S |
JESD-30 Code |
R-PSSO-G4 |
Number of Outputs |
1 |
Output Voltage |
39V |
Output Type |
N-Channel |
Max Output Current |
4.3A |
Supply Voltage-Max (Vsup) |
28V |
Power Supplies |
6/28V |
Supply Voltage-Min (Vsup) |
6V |
Interface |
On/Off |
Nominal Supply Current |
5mA |
Output Configuration |
High Side |
Output Current |
10A |
Voltage - Supply (Vcc/Vdd) |
Not Required |
Input Type |
Non-Inverting |
Turn On Delay Time |
40 μs |
Switch Type |
General Purpose |
Rise Time |
35μs |
Fall Time (Typ) |
65 μs |
Turn-Off Delay Time |
80 μs |
Ratio - Input:Output |
1:1 |
Voltage - Load |
36V Max |
Driver Number of Bits |
1 |
Fault Protection |
Current Limiting (Fixed), Open Load Detect, Over Temperature |
Rds On (Typ) |
24m Ω |
Built-in Protections |
OVER CURRENT; THERMAL; TRANSIENT |
Radiation Hardening |
No |
RoHS Status |
RoHS Compliant |
Lead Free |
Lead Free |
AUIPS6021STRL Overview
It is package in Tape & Reel (TR) case.There is a TO-263-5, D2Pak (4 Leads + Tab), TO-263BB package that includes it.The mounting type of the LED driver is Surface Mount.The switch type is General Purpose.Keeping the temperature at -40°C~150°C TJ ensures reliable operation.As a default, the output is set to 1.It uses a supply voltage of Not Required to operate.A maximum output voltage of N-Channel volts has been specified.It is equipped with Auto Restart features.As you can see, it comes from the AUIPS6021S family.It has a total of 4 terminations.During operation, the 5 pins are used.There are 1 functions of the LED driver.As a result, the maximum output current is reduced to 4.3A in order to meet the operation requirements.With a supply voltage of 14V, high efficiency is possible.It is mounted in the way of Surface Mount.It is included in the Automotive, AEC-Q100 series.When this is the case, the output current is set to 10A.The LED driver is packaged in an econtainer with a capacity of Peripheral Drivers.In this case, Vsup (maximum supply voltage) is set to 28V.Normal operation requires Vsup above 6V.It has a power supply of 6/28V.
AUIPS6021STRL Features
Supplied from 14V
AUIPS6021STRL Applications
There are a lot of Infineon Technologies AUIPS6021STRL Power Switches ICs applications.
- Set-top-box
- USB Power Distribution
- Solid State Drivers
- PC Card Hot Swap
- Portable GPS
- Portable GPS Device
- Smart Phones, Feature Phones
- Smartphone and PDA
- Hot Swap
- HDD, SSD