AUIPS6031
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mount | Through Hole |
| Mounting Type | Through Hole |
| Package / Case | TO-220-5 |
| Number of Pins | 5 |
| Operating Temperature | -40°C~150°C TJ |
| Packaging | Tube |
| Published | 2006 |
| Series | Automotive, AEC-Q100 |
| Feature | Auto Restart |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 5 |
| ECCN Code | EAR99 |
| Subcategory | Peripheral Drivers |
| Power Rating | 25W |
| Max Power Dissipation | 25W |
| Terminal Position | SINGLE |
| Peak Reflow Temperature (Cel) | 250 |
| Number of Functions | 1 |
| Supply Voltage | 14V |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | AUIPS6031 |
| Number of Outputs | 1 |
| Output Type | N-Channel |
| Max Output Current | 8.9A |
| Power Supplies | 6/28V |
| Voltage | 36.3V |
| Interface | On/Off |
| Nominal Supply Current | 2.2mA |
| Current | 16A |
| Output Configuration | High Side |
| Power Dissipation | 25W |
| Output Current | 8.9A |
| Voltage - Supply (Vcc/Vdd) | Not Required |
| Input Type | Non-Inverting |
| Switch Type | General Purpose |
| Rise Time | 20μs |
| Fall Time (Typ) | 30 μs |
| Nominal Input Voltage | 5.5V |
| Ratio - Input:Output | 1:1 |
| Voltage - Load | 36V Max |
| Driver Number of Bits | 1 |
| Fault Protection | Current Limiting (Fixed), Open Load Detect, Over Temperature |
| Load Current | 550mA |
| Output Peak Current Limit-Nom | 16A |
| Rds On (Typ) | 46m Ω |
| Built-in Protections | TRANSIENT; OVER CURRENT; THERMAL; UNDER VOLTAGE |
| Height | 16.51mm |
| Length | 10.67mm |
| Width | 4.83mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | RoHS Compliant |
| Lead Free | Lead Free |
AUIPS6031 Overview
The package is in the form of a Tube.This file is included in package TO-220-5.The lighting driver is mounted in the Through Hole position.This switch is of type General Purpose.To ensure reliable operation, set the temperature to -40°C~150°C TJ.There are 1 outputs available on this lighting driver.Operation is based on a supply voltage of Not Required.The maximum output voltage of this LED driver is N-Channel volts.It is equipped with Auto Restart features.There is a AUIPS6031 family of things that it belongs to.As a result, there are 5 terminations.The operation is carried out using the 5 pins.As far as functions are concerned, the lighting driver has 1.Maximum output current falls to 8.9A when operation criteria are met.As long as the supply voltage is 14V, high efficiency can be achieved.The LED driving board is mounted in the way of Through Hole.This electrical component is included in the Automotive, AEC-Q100 series.As a result, the output current is set to 8.9A.The LED driver is packaged in an econtainer with a capacity of Peripheral Drivers.This part has a power supply of 6/28V volts.
AUIPS6031 Features
Supplied from 14V
AUIPS6031 Applications
There are a lot of Infineon Technologies AUIPS6031 Power Switches ICs applications.
- USB3.1 Power Delivery
- Set-top-box
- Portable Devices
- Hot Swap
- Hard Disk Drives
- Handheld Devices
- Hot-Swap Systems
- HDD, SSD
- Hot Swap
- Storage (HDDs, SSDs)
