AUIPS6031R
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mounting Type | Surface Mount |
| Package / Case | TO-252-5, DPak (4 Leads + Tab), TO-252AD |
| Surface Mount | YES |
| Operating Temperature | -40°C~150°C TJ |
| Packaging | Tube |
| Published | 2012 |
| Series | Automotive, AEC-Q100 |
| JESD-609 Code | e3 |
| Feature | Auto Restart |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 4 |
| ECCN Code | EAR99 |
| Terminal Finish | Tin (Sn) |
| Subcategory | Peripheral Drivers |
| Terminal Position | SINGLE |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | NOT SPECIFIED |
| Number of Functions | 1 |
| Supply Voltage | 14V |
| Reach Compliance Code | compliant |
| Time@Peak Reflow Temperature-Max (s) | NOT SPECIFIED |
| Base Part Number | AUIPS6031R |
| JESD-30 Code | R-PSSO-G4 |
| Number of Outputs | 1 |
| Qualification Status | Not Qualified |
| Output Type | N-Channel |
| Supply Voltage-Max (Vsup) | 28V |
| Power Supplies | 6/28V |
| Supply Voltage-Min (Vsup) | 6V |
| Interface | On/Off |
| Current - Output (Max) | 2.8A |
| Output Configuration | High Side |
| Voltage - Supply (Vcc/Vdd) | Not Required |
| Input Type | Non-Inverting |
| Switch Type | General Purpose |
| Ratio - Input:Output | 1:1 |
| Voltage - Load | 36V Max |
| Driver Number of Bits | 1 |
| Fault Protection | Current Limiting (Fixed), Open Load Detect, Over Temperature |
| Turn On Time | 25 µs |
| Output Peak Current Limit-Nom | 16A |
| Rds On (Typ) | 46m Ω |
| Turn Off Time | 45 µs |
| Built-in Protections | TRANSIENT; OVER CURRENT; THERMAL; UNDER VOLTAGE |
| Output Current Flow Direction | SINK |
| Height Seated (Max) | 2.52mm |
| Length | 6.54mm |
| Width | 6.095mm |
| RoHS Status | RoHS Compliant |
AUIPS6031R Overview
It is packaged in the form of a Tube.It is included in the package TO-252-5, DPak (4 Leads + Tab), TO-252AD.This lighting drivere has a mounting type of Surface Mount.General Purpose is the switch type that it owns.To ensure reliable performance, the temperature should be set to -40°C~150°C TJ.It is possible to use 1 outputs in the lighting driver.The LED driving board is powered by a voltage of Not Required.There is a maximum output voltage of N-Channel volts on this LED driver.It is equipped with Auto Restart features.It is a member of the AUIPS6031R family.A total of 4 terminations can be found in it.The LED driver has 1 functions.There is a maximum output of 2.8AV from the LED driver.As long as the supply voltage is 14V, high efficiency can be achieved.It is part of the Automotive, AEC-Q100 series.There is a Peripheral Drivers capacity container for this LED driver that is self-contained.The Vsup value (maximum supply voltage) is set to 28V.In order to operate normally, the supply voltage (Vsup) must be maintained above 6V.It has a power supply of 6/28V.
AUIPS6031R Features
Supplied from 14V
AUIPS6031R Applications
There are a lot of Infineon Technologies AUIPS6031R Power Switches ICs applications.
- Portable/Handheld Devices
- Storage Drives
- PC Cards
- Wireless/Networking Cards
- Hot Swap
- Handheld Devices
- Wearable Devices
- Hot-Swap Systems
- Gaming
- Hard Disk Drives
